Get quotes for a used or replacement Škoda Yeti roof panel. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used roof panel varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Škoda Yeti was produced as a single generation running from 2009 to 2017, receiving a facelift in 2013 that updated the front end and some body panels. The roof panel itself is a large pressing shared across the full production run, so a pre-facelift (2009–2013) roof is generally considered the same pressing as a post-facelift (2013–2017) roof, but because mid-generation pressing changes can occur without public announcement, you should confirm this against your registration with the breaker before buying.
A 2011 Yeti is pre-facelift and a 2015 is post-facelift, so your donor part sits either side of the 2013 facelift boundary. The roof panel was not a headline change at the facelift, and the underlying platform remained the same throughout 2009–2017, which is encouraging. However, whether the specific pressing is identical across that boundary is exactly the kind of detail you should confirm with the breaker against both registrations before proceeding.
Trim level does not affect roof panel fitment on the Škoda Yeti — the same pressing is used regardless of whether the car is an S, SE, Elegance, or Outdoor. The one cosmetic difference to be aware of is that some trims were fitted with a panoramic glass roof or roof rails, which may mean the donor panel has cut-outs or mounting points that differ from your car's; make sure you match like-for-like on this point with the breaker. Trim level alone, though, gives no reason to reject a panel.
Yes — the drivetrain (2WD or 4x4) has no bearing whatsoever on roof panel fitment, as these are entirely separate areas of the vehicle. The roof pressing is determined by the body shell, not what is happening under the floor, so you do not need to match drivetrain when sourcing this part.
Engine choice has no effect on roof panel fitment — whether the donor car is a 1.2 TSI, 1.4 TSI, 2.0 TDI or any other engine variant makes no difference to the roof pressing. Focus instead on confirming the model year sits within the same production phase as your car, and check whether the donor has the same glass roof or roof rail arrangement as yours.
Give the breaker your full registration so they can check the exact build specification of your car against the donor vehicle. The key things to match are the model year (within the 2009–2017 run), whether your car has a panoramic roof or standard roof, and whether it has roof rails — these affect the pressing or at least the finishing holes. Engine, trim level, and drivetrain can all be ignored for this part.