Get quotes for a used or replacement Škoda Scala alloy wheels. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used alloy wheelss vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Also known as: alloys, rim, rims.
The Škoda Scala launched in 2019 and received a facelift in 2022, with production continuing from there. For alloy wheel fitment the key figures are bolt pattern (PCD), offset, and centre bore rather than the model year itself, so a pre-facelift and post-facelift car can share wheels if those measurements match. That said, if you are sourcing a wheel from across the 2022 facelift boundary, confirm the exact specifications with the breaker against your registration before buying.
The Scala uses a 5×112 PCD and 57.1 mm centre bore throughout its production run, so pre-facelift (2019–2021) and post-facelift (2022 onwards) cars share the same fundamental bolt pattern. Fitment is more likely to be straightforward if the offset also matches, but because a 2019 and a 2023 car sit either side of the 2022 facelift boundary, you should confirm the exact offset and any wheel-design changes with the breaker against your registration.
The Scala is built on the Volkswagen MQB-A0 platform and shares a 5×112 PCD and 57.1 mm centre bore with many MQB-family cars including certain Golf and Leon generations, so interchange is common. The critical figure to match is the offset (ET value), which can vary between models and wheel sizes within that platform family. Ask the breaker to confirm the exact ET and centre bore of the specific wheel against your Scala's registration before purchasing.
Trim level does not affect the underlying bolt pattern, offset, or centre bore on the Scala, so wheels from an Active will bolt onto a Sportline and vice versa. What will differ is the wheel design and diameter — Sportline and SE L models typically came with larger or more stylised alloys than entry-level trims, so expect a cosmetic difference if you mix across trims. As long as PCD, offset, and centre bore match, fitment is not restricted by trim.
Many Scalas were fitted with tyre-pressure monitoring systems, and used wheels may or may not come with the original TPMS sensors still installed. Whether a sensor from a donor wheel will communicate correctly with your car's system depends on the sensor type and coding, which we cannot confirm here. Check with the breaker whether sensors are included and have compatibility verified against your registration before you commit.
Engine choice makes no difference to alloy wheel fitment on the Scala; the bolt pattern, offset, and centre bore are the same regardless of which engine is under the bonnet. You can safely source a wheel from any Scala engine variant as long as the PCD, offset, and centre bore match your car. Confirm those figures with the breaker against your registration to be sure.