Get quotes for a used or replacement Škoda Citigo alloy wheels. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used alloy wheels varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Also known as: alloys, rim, rims.
The Škoda Citigo was produced from 2011 to 2019 in the UK, with a mid-life facelift arriving around 2017 that brought updated styling details. Alloy fitment is governed by bolt pattern (PCD), offset, and centre bore rather than model year, so a pre-facelift wheel can physically fit a post-facelift car if those measurements match. However, whether a specific wheel crosses the 2017 facelift boundary without any clearance or TPMS issues is worth confirming with the breaker against your registration before you buy.
The 2013 Citigo is pre-facelift and the 2018 is post-facelift (the refresh came in around 2017), so you are crossing a generation boundary here. The key numbers to match are the PCD, offset, and centre bore — if those are the same on both wheels, the physical fitment should work. Because you are spanning the facelift year, we'd recommend confirming the exact specs with the breaker against both registrations rather than assuming they are identical.
Trim level does not affect alloy fitment on the Citigo — the PCD, offset, and centre bore are what matter, not whether the wheel came from an S, SE, or Elegance car. What can differ between trims is the alloy design and diameter, so a wheel from a lower-spec car may look different on your vehicle even if it fits perfectly. Check the size and style suit you before purchasing, but mechanically trim is not a barrier.
The Citigo shares its platform with the Volkswagen up! and SEAT Mii, so alloys from those models are commonly interchangeable where PCD, offset, and centre bore are matching — this type of cross-model interchange within the same VW Group platform is well established among breakers. That said, confirm the exact specs of the specific wheel you are being quoted on against your Citigo's registration, as individual wheel variants can differ even within the same model family. Your breaker should be able to verify this quickly.
The three things that determine whether an alloy will fit are the bolt pattern (PCD), offset (ET rating), and centre bore diameter — make sure these match your car's spec before agreeing a purchase. Tyre size can give a small amount of offset tolerance, but how much is acceptable for your setup is something to discuss directly with the breaker rather than assume. Also note that if your car has TPMS (tyre pressure monitoring sensors), compatibility of any sensors in the used wheels is not guaranteed and should be confirmed with the breaker against your registration.
Used Citigo alloys can be good value from a reputable breaker, but it is worth asking about kerbing damage on the rim edges, corrosion around the spoke faces, and whether the wheel has been refurbished — a badly repaired alloy can look fine in photos but still cause balancing problems. Also confirm the centre caps are included if you need them, as these are often missing on dismantled wheels. Asking the breaker to confirm the PCD, offset, and centre bore against your registration before dispatch will save you a return journey.