Compare prices on a used Škoda Scala sump from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two sumps are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
The Scala is a single-generation model launched in 2019, so a 2019 and a 2022 car can share the same engine family – but fitment really comes down to matching the engine code, not just the year. Pull the engine code from your V5 or a HPI/VIN check and make sure the breaker's sump comes from a car with the same code. Never assume fitment on year alone.
The engine code is the single most useful detail you can supply – it tells a breaker exactly which block the sump was designed for, where year alone does not. Two Scalas built in the same year can carry different engines (for example a 1.0 TSI versus a 1.5 TSI), and their sumps are not interchangeable. Find the code on your V5 logbook or ask for a VIN decode before requesting quotes.
Yes – fuel type affects the engine family and therefore the sump design, so a petrol sump will not suit a diesel engine and vice versa. Always confirm your fuel type and engine code when contacting a breaker. Mixing these up is one of the most common ordering mistakes on mechanical parts.
Trim level – whether Active, SE, or Monte Carlo – does not affect sump fitment; the sump follows the engine, not the badge or specification package. What matters is that the engine code on the donor car matches yours exactly. You may find cosmetic or interior differences between trim levels on a stripped breaker car, but mechanically the sump itself is trim-neutral.
The Scala does sit on the MQB-A0 platform and shares engine families with other VAG group models, so there is a reasonable chance of cross-brand sump compatibility where the engine code is identical. However, ancillary bracket positions and mounting points can vary between vehicles even within the same engine family, so you should confirm fitment against your specific registration with the breaker rather than assume platform-sharing guarantees a straight swap. Give the breaker both the donor vehicle's registration and your own so they can cross-reference properly.
For the sump itself the gearbox type is very unlikely to be the deciding factor, since the sump is attached to the engine block rather than the transmission. What matters most is still the engine code, which will confirm you have the correct variant of the 1.0 TSI. That said, confirm with the breaker against your registration to rule out any ancillary differences tied to DSG-equipped cars on your specific build date.