Get quotes for a used or replacement Škoda Octavia clutch master cylinder. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used clutch master cylinders vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Mk1 Octavia ran from 1996 to 2010 in the UK, so both years sit within the same generation, which is a good starting point. Fitment still depends heavily on the engine code rather than the year alone, as different engines used different hydraulic specifications even within that generation. Give the breaker both registration numbers and ask them to cross-reference by engine code to confirm the part will interchange.
The Mk2 Octavia ran from 2004 to 2013, overlapping with the tail end of the Mk1, but they are different platforms with different hydraulic systems, so a straight swap across that generation boundary is unlikely. Engine code differences between the two generations make this even less predictable. Confirm with the breaker against both registrations before buying.
The clutch master cylinder only exists on Octavia variants fitted with a manual gearbox; if your car has a DSG dual-clutch automatic or a traditional automatic, there is no clutch pedal and therefore no clutch master cylinder. Some DSG-equipped Octavias do have internal clutch packs, but those are operated hydraulically within the gearbox itself and are a completely different component. Check your V5 or a VIN check to confirm your gearbox type before searching for this part.
Trim level — whether SE, Elegance, Laurin & Klement, or vRS — does not affect clutch master cylinder fitment; this is a purely mechanical part driven by the engine code and gearbox type rather than the badge on the boot. A vRS with the same engine code as a lesser trim should use the same unit, though the vRS often had engine codes specific to that variant, so it is still worth quoting the code to the breaker. Confirm with the breaker against your registration to be certain.
The single most useful detail is the engine code, which is printed on your V5 logbook or available through a VIN check — it identifies the exact hydraulic specification needed far more reliably than the year or trim alone. You should also confirm you have a manual gearbox, since the part simply does not exist on automatic variants. Give the breaker your full registration, engine code, and gearbox type, and ask them to check ancillary fittings match before dispatch.
The Mk3 Octavia launched in 2013 and ran to 2020, so a 2013 car could be either the very end of the Mk2 or an early Mk3, making year alone unreliable here. Even if both cars are confirmed Mk3, engine code differences across that generation boundary mean the hydraulic specifications may not match. Route this directly to the breaker with both engine codes and registrations, and do not assume fitment without their confirmation.