Compare prices on a used Škoda Kodiaq fuel injection pump from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used fuel injection pump that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Kodiaq first generation ran from 2016 to 2021, with a facelift arriving in 2021, so a 2018 pump and a pre-facelift 2021 car sit within the same generation — but fitment still depends on both cars sharing the same engine code, which you'll find on your V5 or via a VIN check. If your 2021 is actually the facelifted model, you're crossing a production boundary and should confirm compatibility with the breaker against both registrations before buying. Engine code match is the deciding factor above all else.
Trim level — whether it's SE, SE L, Edition, Sportline, or vRS — does not determine fuel injection pump fitment; what matters is the engine code, fuel type, and gearbox type. The vRS used a different engine from most SE and SE L cars, so the pumps are unlikely to interchange, but that's because of the engine, not the badge. Always match the engine code from your V5 rather than going by trim name alone.
The engine code is the single most important detail for a fuel injection pump — it tells the breaker exactly which pump was fitted at the factory, far more reliably than the year or trim level. You'll find it on your V5 logbook, usually a three-letter code such as DFGA for the 2.0 TDI, though codes vary across the range. Give the breaker your full engine code and registration so they can cross-reference their stock accurately.
Fuel type is fundamental — a diesel fuel injection pump is a completely different component to a petrol direct-injection pump and the two are not interchangeable under any circumstances. Make sure you know whether your Kodiaq is TDI (diesel) or TSI (petrol) before requesting quotes, and confirm this with your engine code. Mixing fuel-type components would cause serious engine damage.
The Kodiaq received its facelift in 2021, and while some mechanical components carried over, ancillary and mounting changes can occur across a production refresh. You should name that boundary to the breaker and ask them to confirm compatibility against both registrations rather than assume a pre-facelift pump will simply drop in. Matching engine codes is still the starting point, but the breaker needs to verify the rest.
Drive configuration — 2WD or 4WD — does not directly determine which fuel injection pump is fitted; the engine code and fuel type are what matter. That said, certain engine and gearbox combinations were paired exclusively with one drivetrain or the other, so your engine code will implicitly reflect that. Provide your full engine code and registration to the breaker so they can match the pump correctly.