Compare prices on a used Škoda Karoq bonnet strut from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
The Škoda Karoq uses gas-charged bonnet struts rather than a prop rod, so you are in the right place searching for this part. There are typically two struts, one on each side, supporting the bonnet when open. Used examples are widely available from breakers who have dismantled Karoq vehicles.
The Škoda Karoq was introduced in 2017 and received a facelift in 2021, which brought changes to the front end including the bonnet profile. A 2018 strut is pre-facelift and a 2022 strut is post-facelift, so the two generations may not share the same strut geometry or mounting points. You should confirm with the breaker whether the pre-facelift part crosses over to your post-facelift registration before buying.
Trim level does not affect which bonnet strut you need, as the bonnet and its supporting hardware are shared across the SE, SE L, Sportline and Edition variants within the same generation. You may find cosmetic differences around the engine bay on higher trims but the strut itself is the same part. Any pre-facelift Karoq strut should suit any other pre-facelift car, and likewise for post-facelift, but always confirm mounting compatibility with the breaker against your registration.
Yes, the Karoq has one strut on the nearside (NS, passenger side) and one on the offside (OS, driver side), and in most cases they are mirror-image parts that are not interchangeable between sides. When contacting a breaker, specify NS or OS to ensure you receive the correct strut for your vehicle. If you are replacing both, ask the breaker whether they can supply a matched pair from the same dismantled car.
The 2021 facelift updated the Karoq's front end, and while the basic bonnet mechanism is similar in concept, differences in bonnet shape and hinge geometry between the pre-2021 and post-2021 cars could affect strut fitment. The facelift boundary of 2021 is the key question here, and you should not assume the parts are interchangeable across it. Confirm with the breaker by providing your full registration so they can check the part against the correct build specification.
Engine type makes no difference to bonnet strut fitment on the Karoq, as the bonnet and its gas struts are shared across petrol and diesel variants within the same generation. You simply need to match the generation (pre or post 2021 facelift) and ensure the correct NS or OS side. This makes it straightforward to find a suitable used part from any Karoq of the right era regardless of its original drivetrain.