Second Hand Nissan X-Trail Alloy Wheels

These are different generations with different bolt patterns, so a straight swap is very unlikely — the T30 uses a 5×114.3 PCD while the T31 also runs 5×114.3, but offset and centre bore differences mean you should not assume they are interchangeable without checking. Name the generation boundary (T30 to T31, 2007) and confirm the exact offset and centre bore of the specific wheels against your car's spec with the breaker before buying. Never assume fitment across a generation change.

The T32 and T31 are separate generations and almost certainly differ in offset and possibly centre bore, so wheels from a T32 are not a guaranteed fit on a T31 even if the PCD happens to match. Confirm the bolt pattern, offset, and centre bore of any specific set against your registration with the breaker before purchasing. Crossing this generation boundary is exactly the kind of case where a breaker's hands-on check is essential.

Trim level does not affect alloy wheel fitment on the Nissan X-Trail — what matters is the generation (T30, T31, or T32), the PCD (bolt pattern), offset, and centre bore, not whether the donor car was SE, Acenta, or Tekna. Higher trims like Tekna often came with larger-diameter wheels, so you may end up with a different look or need to check your tyre sizing, but the mechanical fitment criteria remain the same. Confirm PCD, offset, and centre bore with the breaker against your registration, and be prepared for a cosmetic difference if mixing wheel sizes between trim levels.

Nissan does use common bolt patterns across its range — for example, the Qashqai and X-Trail of the same era often share a 5×114.3 PCD — so cross-model interchange is sometimes possible. However, offset and centre bore must also match, and these can vary even between models sharing the same PCD. Check the exact offset and centre bore of any candidate wheels against your X-Trail's spec with the breaker, quoting your registration, before going ahead.

The T31 ran from 2007 to 2013 with a facelift around 2010, but this was a styling refresh rather than a platform change, so the underlying wheel fitment specifications — PCD, offset, and centre bore — are expected to remain the same across the T31 range. In practice, pre-facelift and post-facelift T31 alloys are generally interchangeable, but style differences between earlier and later wheels may be noticeable. Confirm the specific set's measurements with the breaker against your registration to be sure.

If your X-Trail is fitted with a tyre pressure monitoring system (TPMS), any used alloys you buy may or may not come with compatible sensors, and sensor compatibility depends on the specific sensor type, not just the wheel or car model. Confirm with the breaker whether sensors are included and whether they are compatible with your car's system before buying, as mismatched or missing sensors can trigger dashboard warnings.