Findapart

Cheap Nissan X-Trail Aerial

Need a used Nissan X-Trail aerial? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Nissan X-Trail aerial

Used aerials vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Nissan X-Trail parts

Used aerial for other Nissan models

Fitment questions

Will a Nissan X-Trail aerial from a different year fit my car?

The X-Trail has run across three generations in the UK: the first-generation T30 (2001–2007), the second-generation T31 (2007–2014), and the third-generation T32 (2014–2022). Aerials and their mounting points differ between these generations, so a like-for-like swap is most straightforward within the same generation. If you are looking at a part that crosses a generation boundary — for example, a late T31 into an early T32 — confirm compatibility with the breaker against your registration before buying.

Does a 2012 Nissan X-Trail aerial fit a 2010 model?

Both a 2010 and a 2012 X-Trail fall within the second-generation T31 (2007–2014), so an aerial from one is likely to be compatible with the other. That said, it is always worth checking with the breaker using both registration numbers to rule out any mid-run changes to the mounting or connector.

Can I use a T31 aerial on a T32 Nissan X-Trail?

The T31 ran from 2007 to 2014 and the T32 from 2014 to 2022, and these are distinct generations with different bodywork and roof profiles, so the aerial and its base are unlikely to be a direct swap. Confirm with the breaker against your registration before purchasing a part from across this generation boundary.

Does it matter what trim level the aerial came from — for example, Visia, Acenta, or Tekna?

Trim level does not generally affect aerial fitment on the X-Trail — a Visia, Acenta, or Tekna aerial from the same generation should physically fit the same mounting point. You may notice cosmetic differences such as finish or colour of the base, so check with the breaker if appearance is important to you.

I have a diesel X-Trail — do I need a diesel-specific aerial?

No, the aerial on the X-Trail is not engine-specific, so a part from a petrol model of the same generation will fit a diesel and vice versa. Just make sure you are matching the correct generation rather than worrying about what is under the bonnet.

What type of aerial does the Nissan X-Trail use — is it a roof-mounted mast or a shark-fin?

Earlier X-Trails, particularly the T30 and T31, typically used a traditional screw-in mast-style aerial, while the T32 generation moved towards a shark-fin aerial integrated into the roof. This means the two styles are not interchangeable, so when sourcing a used aerial, make sure the breaker is supplying the correct type for your generation and confirm the connector and base plate match your car.