Used Nissan Kubistar Wishbone

The Nissan Kubistar was sold in the UK broadly from 2003 to 2008, and being a single-generation van based on the Renault Kangoo platform, the generation boundary is less about facelifts and more about the Kangoo generation it shared underpinnings with. For wishbones, the key things to match are the model year, engine size, and payload/GVW rating shown on your van's plate — not just the Kubistar name. Always confirm the exact part against your registration with the breaker.

Because the Kubistar ran as a single generation throughout its UK lifespan (2003–2008) on the same Kangoo-derived platform, there is a reasonable chance of compatibility across those years, but running gear components including wishbones can vary with engine size and GVW rating even within that span. Check your van's plate for payload/GVW and tell the breaker your engine size alongside the year so they can confirm the part matches. Never assume fitment on year alone.

Yes, engine size can influence suspension and running gear specifications because heavier or more powerful variants may use differently rated components to handle the extra load or output. When contacting a breaker, give them your exact engine size (for example 1.5 dCi or 1.6 petrol) as well as your model year and GVW rating. This gives the breaker the best chance of matching the correct wishbone to your van.

On a van like the Kubistar, the payload and GVW rating shown on the manufacturer's plate can affect running gear specifications, so two vans that look identical may not share the same wishbone if their ratings differ. Check the plate on your van rather than relying on the model name alone, and pass that GVW figure to the breaker alongside your year and engine. This is one of the most commonly overlooked factors when sourcing van suspension parts.

Yes, this matters — nearside (NS, left as you sit in the van) and offside (OS, right) wishbones are handed and not interchangeable, so make sure you identify which side needs replacing before contacting a breaker. If you are unsure which side is which, NS is the kerb side and OS is the driver's side on a UK right-hand-drive vehicle. Always specify the side clearly when requesting a quote.

Trim level does not affect wishbone fitment on the Kubistar — the suspension geometry is determined by the generation, engine size, and GVW rating, not by specification level or cosmetic features. You may find cosmetic differences between parts pulled from different trim vans, such as brackets or paint, but these do not affect whether the wishbone itself fits. Focus on year, engine, GVW, and side when sourcing, and confirm against your registration with the breaker.