Cheap Nissan Vanette Wishbone

The Nissan Vanette was sold in the UK across two main generations: the C22 series ran from around 1986 to 1995, and the C23 series followed from 1995 onwards into the early 2000s. The generation matters significantly for wishbone fitment because the front subframe and suspension geometry changed between the two, so a C22 wishbone will not reliably cross to a C23. Always confirm the exact series with your breaker against your registration number before ordering.

Within the C22 generation the front suspension design was largely carried over, so there is a reasonable chance of compatibility across that 1986–1995 span. However, any mid-generation running-gear revisions could affect fitment, so you should confirm directly with the breaker that the part from the donor vehicle matches your specific registration. Never assume fitment solely on the year range without that check.

The C22 (1986–1995) and C23 (1995 onwards) sit either side of a significant model boundary, and suspension geometry changes mean you cannot assume the wishbone will interchange. Even if the parts look similar, mounting points and arm dimensions may differ enough to cause a safety-critical problem. Route this question to the breaker and give them both registration numbers so they can verify against the actual part numbers.

Yes — on vans like the Vanette, payload and GVW rating can influence the front suspension specification, so a higher-rated variant may carry a heavier-duty wishbone than a lighter version of the same model year. Check the data plate in your vehicle (usually on the door shut or under the bonnet) for the GVW figure and pass that to the breaker alongside your registration. Do not rely on the model name alone, as two Vanettes from the same year can have different ratings and different parts.

Yes, this is critical — wishbones are handed, meaning the NS (driver's side in UK traffic, left-hand side facing forward) and OS (passenger side, right-hand side facing forward) are mirror images and not interchangeable. Always specify clearly to the breaker which side you need, and if you are unsure, tell them which wheel the problem is on and let them confirm the side. Ordering the wrong hand is a very common and easily avoided mistake.

Trim level does not affect which wishbone you need — the front suspension components are determined by the generation (C22 or C23), the engine size, and the vehicle's GVW rating, not by whether the van is a higher or lower specification. A wishbone from a lower-spec donor vehicle will fit a higher-spec van of the same generation and weight rating, and vice versa. You may simply find cosmetic differences in surface finish or minor corrosion on a used part, but these do not affect fitment.