Second Hand Nissan Almera Wishbone
Need a used Nissan Almera wishbone? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A buyer's guide to used Nissan Almera wishbone
No two wishbones are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
- State whether it's front left or front right
Other used Nissan Almera parts
- Used Nissan Almera Tyre
- Used Nissan Almera Brake Servo
- Used Nissan Almera Steering Wheel
- Used Nissan Almera Wheel Hub
- Used Nissan Almera Clutch Slave Cylinder
- Used Nissan Almera Rear Cross Member
- Used Nissan Almera Scuttle Panel
- Used Nissan Almera Door Handle
- Used Nissan Almera Oil Cooler
- Used Nissan Almera Handbrake Cable
- Used Nissan Almera Front Bumper
- Used Nissan Almera Brake Master Cylinder
Used wishbone for other Nissan models
Fitment questions
What years does the Nissan Almera wishbone fit – are there different generations I need to know about?
The Almera ran across two main UK generations: the N15 (1995–2000) and the N16 (2000–2006), with the N16 receiving a facelift around 2003. Wishbone geometry can differ between these generations, so always match your part to the correct generation rather than just the year. Confirm the generation with your breaker against your registration to be sure.
Will a wishbone from a 2001 Almera fit my 2004 Almera – does the 2003 facelift change anything?
Both the 2001 and 2004 cars sit within the N16 generation (2000–2006), with the facelift falling around 2003. The facelift was primarily cosmetic, but whether the running gear changed at that point is something you should confirm with the breaker against your registration rather than assume it carries straight over. Always quote your reg so the breaker can cross-reference the exact part number.
Does engine size matter when buying a used Almera wishbone?
For the Almera, the wishbone geometry is generally consistent across the range, but engine size can influence associated running-gear components such as brakes and hubs, so it is worth mentioning your engine when contacting a breaker. Confirm with the breaker against your registration that the donor car's engine size is compatible with yours before purchasing.
Does it matter whether I buy an Almera wishbone from an LX, GX, or SE trim car?
Trim level does not affect wishbone fitment on the Almera – the LX, GX, and SE are differentiated by interior and cosmetic specification, not by suspension geometry. You may notice cosmetic differences such as differing underbody protection or brackets between stripped-out and better-specified cars, but these do not change whether the wishbone itself fits. Focus on matching generation and side (NS or OS) rather than trim.
Does it matter which side – nearside or offside – I order for my Almera wishbone?
Yes, this matters significantly: nearside (NS, driver's left, kerb side) and offside (OS, driver's right, road centre side) wishbones are handed and are not interchangeable. Always specify NS or OS clearly when getting a quote from a breaker, and double-check the side before the part is dispatched.
Will an Almera N15 wishbone from before 2000 fit my N16 that was registered after 2000?
The N15 (1995–2000) and N16 (2000–2006) are distinct generations with different platforms, so a wishbone from the N15 is very unlikely to be a direct fit for an N16. You should not assume interchangeability across this generation boundary, and you must confirm with the breaker against both registrations before purchasing. Matching the correct generation is the single most important step when sourcing this part.