Used Nissan Kubistar Window Regulator

The Nissan Kubistar was produced from 1997 to 2008, based on the Renault Kangoo of the same era. Because the Kubistar shares its platform and body structure with the Kangoo, regulators from within the same generation tend to cross over well, but if you are looking at a part from either end of that production run — particularly around the 2003 refresh period — confirm with the breaker against your registration that the regulator matches your exact door aperture before buying.

Yes, it can matter significantly for the side doors. The Kubistar was available with either a sliding side door or hinged rear side doors depending on body variant, and the regulator design follows the door type — a sliding-door regulator will not interchange with a hinged-door setup. For the front doors the mechanism is determined by side (NS or OS) rather than body variant, so always tell the breaker which door position you need and confirm the door type on your vehicle.

Yes, front window regulators are side-specific — the nearside (NS, passenger left) and offside (OS, driver right) are mirror images of each other and will not swap. When contacting a breaker, make clear which side you need using NS or OS, as fitting the wrong side will mean the mechanism runs the wrong way in the door frame.

No, trim level does not affect window regulator fitment — the door frame and guide channel are the same regardless of specification. One thing to be aware of is that electric versus manual regulator types can differ, and whether your vehicle has electric windows is worth checking before ordering; if you are unsure whether this changed across certain build dates, confirm with the breaker against your registration to make sure the mechanism type matches.

The Nissan Kubistar is mechanically and structurally derived from the first-generation Renault Kangoo (approximately 1997–2008), so regulators from the equivalent Kangoo generation are widely regarded as interchangeable for the front doors. However, because production timelines and minor revisions can differ between the two brands, you should confirm with the breaker that the part number or door dimensions match your specific registration rather than assume it will fit outright.

Yes, if your Kubistar has a sliding side door, wheelbase can affect the door size and therefore the regulator, as a longer wheelbase may use a larger sliding door aperture. Always tell the breaker your wheelbase variant alongside your registration so they can match the correct sliding-door regulator rather than simply the side (NS or OS).