Second Hand Nissan Juke Window Switch

The Nissan Juke first generation ran from 2010 to 2019, with a facelift arriving in 2014, so your 2011 and 2014 cars sit either side of that facelift boundary. The physical switch design and door panel layout did change around the facelift, so a pre-2014 switch may not clip correctly into a post-2014 door card. Confirm with the breaker whether the part number from their vehicle matches yours before buying.

Yes, electric windows and their associated switches were fitted across the Juke range from launch in 2010 through to the end of the first generation in 2019, including entry-level trims on most model years. All five-door Jukes have switches for all four windows, typically housed in the driver's door master panel and individual switches in the remaining doors. If you are on a very early or base-spec car and are unsure whether your trim had electric rear windows, confirm with the breaker against your registration.

Trim level does not affect which window switch fits the Juke — the door architecture and switch aperture are shared across Visia, Acenta, N-Connecta, Tekna, and other named grades. You may find switches from higher trims look slightly different in finish or have additional buttons for features like one-touch operation, but the physical fitment into the door card is the same. Bear in mind a switch from a different trim may look noticeably different to your existing interior, so check the appearance with the breaker if that matters to you.

Yes, this is important: the driver's door (offside, OS, right-hand side in UK vehicles) typically carries the master switch panel controlling all windows, while the passenger door (nearside, NS, left-hand side) and rear doors carry single-window switches. These are not interchangeable with each other, so always tell the breaker which door the switch is from. Getting the side wrong is one of the most common ordering mistakes with window switches.

Both a 2015 and a 2017 Juke fall within the post-facelift phase of the first generation (facelift from 2014, end of generation 2019), so these two cars share the same body generation and door design. Fitment is more likely to be compatible within this post-facelift window than across the 2014 boundary, but minor running changes can occur during a production run. Confirm the part number with the breaker against both registrations to be sure before purchasing.

No — the second-generation Juke launched in 2019 is a completely different vehicle with a redesigned body and interior, and its window switches will not be compatible with the first-generation model (2010–2019). Always make sure the breaker's donor vehicle is the same generation as yours. If your car is a 2019 model, clarify with the breaker whether it is the outgoing first generation or the new second generation, as both were on sale that year.