Second Hand Hyundai Tucson Intercooler
Need a used Hyundai Tucson intercooler? Request a free quote from UK vehicle dismantlers and compare offers direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Buying a used Hyundai Tucson intercooler: what matters
Fitment on a used intercooler varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
- State whether it's petrol or diesel
- State the engine code if known
Other used Hyundai Tucson parts
- Used Hyundai Tucson Cylinder Head
- Used Hyundai Tucson Throttle Body
- Used Hyundai Tucson Coil Pack
- Used Hyundai Tucson Starter Motor
- Used Hyundai Tucson Seat
- Used Hyundai Tucson Rear Panel
- Used Hyundai Tucson Front Grille
- Used Hyundai Tucson Wheel Hub
- Used Hyundai Tucson Parcel Shelf
- Used Hyundai Tucson Roof Panel
- Used Hyundai Tucson Steering Column
- Used Hyundai Tucson Boot Lid
Used intercooler for other Hyundai models
Fitment questions
Does my Hyundai Tucson actually have an intercooler?
Only turbocharged Tucson engines have an intercooler — it is part of the forced-induction system that cools compressed air before it enters the engine. All diesel variants (such as the 2.0 CRDi and 1.6 CRDi) are turbocharged and do have an intercooler, as does the 1.6 T-GDi petrol. Naturally aspirated petrol engines fitted to some earlier Tucson variants do not have an intercooler at all, so if your car has one of those engines you will need to look for a different part.
Will an intercooler from a first-generation Tucson (TL, 2015–2020) fit my second-generation Tucson (NX4, 2021 onwards)?
No — the TL generation (2015–2020, facelifted 2018) and the NX4 generation (2021 onwards) use different engine families and different engine bay layouts, so their intercoolers are not interchangeable. Always match the part to the same generation and, most importantly, to the same engine code as your car. Supply your registration or engine code to the breaker so they can confirm the correct unit.
Does a pre-facelift TL Tucson intercooler (2015–2018) fit a post-facelift TL (2018–2020)?
Both sit within the same TL generation, so there is a reasonable chance of compatibility if the engine code is identical — the engine code is the single most reliable guide here. However, ancillary brackets and pipe routing can change at a facelift even when the core unit looks similar, so confirm against your specific registration with the breaker before purchasing.
Does the trim level affect which intercooler I need — for example, will a part from an S-grade car fit my Premium SE?
Trim level makes no difference to intercooler fitment whatsoever — what matters is the engine code, not whether the donor car was an S, SE, Premium, or Premium SE. Any differences between trim levels are cosmetic (interior, wheels, equipment) and have no bearing on the intercooler. Just make sure the engine code on the donor vehicle matches yours, which you can find on your V5C or via a VIN check.
I have a 2.0 CRDi and the breaker has a 1.6 CRDi intercooler — will it fit?
Almost certainly not — different engine displacements and codes have different intercooler sizing, pipe connections, and mounting points, even within the same generation and the same fuel type. The engine code must match, not just the fuel type or the model year. Always quote your exact engine code to the breaker so they can pull the correct unit from the right donor vehicle.
Does it matter whether the donor Tucson was front-wheel drive or four-wheel drive when buying a used intercooler?
Drivetrain layout (2WD versus 4WD) does not affect the intercooler itself, as the intercooler is determined by the engine rather than how power is sent to the wheels. What matters above all else is that the engine code matches between the donor car and your vehicle. Confirm the engine code with the breaker against your registration to make sure you are getting the right part.