Findapart

Second Hand Škoda Yeti Propshaft

Need a used Škoda Yeti propshaft? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Yeti propshaft: what matters

Fitment on a used propshaft varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Yeti parts

Used propshaft for other Škoda models

Fitment questions

Does the Škoda Yeti actually have a propshaft?

Only some Yeti variants have a propshaft — specifically those with four-wheel drive (4x4), where a propshaft runs from the gearbox to the rear axle. Front-wheel-drive Yeti models have no propshaft at all, so if your car is FWD you won't find this part because it was never fitted. Check your V5C or the sticker inside the driver's door jamb to confirm whether your Yeti is 4WD before searching.

Will a propshaft from a 2010 Yeti fit my 2014 Yeti?

The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift arriving in 2013, so a 2010 car and a 2014 car sit either side of that facelift boundary. Whether the propshaft changed across that facelift is not something we can confirm with certainty, so you should give the breaker both registration numbers and let them verify compatibility before buying. Do not assume pre- and post-facelift propshafts are interchangeable without that check.

Does engine size affect which propshaft I need for a 4WD Yeti?

Engine size and the associated power output can influence the propshaft specification, as higher-torque drivetrains sometimes use a heavier-duty shaft. The Yeti 4x4 was offered with a range of petrol and diesel engines including 1.2 TSI, 1.4 TSI, 1.8 TSI, 1.6 TDI, and 2.0 TDI units, and the shaft from a lower-powered variant may not be rated the same as one from the 2.0 TDI. Always confirm the engine size and power output with the breaker against your registration to ensure the part is suitable.

Does trim level — for example Yeti S, SE, or Elegance — change which propshaft I need?

Trim level alone does not determine the propshaft fitted to a Yeti — what matters is whether the car has 4WD and what engine it carries, both of which were available across multiple trim levels. A 4WD SE and a 4WD Elegance with the same engine should use the same propshaft, while a front-wheel-drive car of any trim will have no propshaft at all. Focus on drivetrain and engine when sourcing the part rather than the trim name.

Can I use a propshaft from a Yeti Outdoor on a standard Yeti?

The Yeti Outdoor was a styling and equipment variant rather than a mechanically distinct model, and where the drivetrain and engine match, the propshaft should be the same part. That said, confirm this with the breaker using both registrations, as subtle changes between the two can occasionally exist and are difficult to rule out without checking the actual part numbers. Never assume fitment based on the Outdoor badge alone.

My Yeti is a late 2016 model — will a propshaft from a 2013 or 2014 car fit?

A 2016 Yeti is post-facelift (the facelift arrived in 2013), so a 2013 or 2014 car is also post-facelift, which means both sit within the same generation phase. Whether propshafts are interchangeable across this period depends on engine and drivetrain spec rather than the facelift year, but there is always a possibility of mid-run changes, so provide your registration to the breaker and ask them to cross-reference part numbers before you commit.