Compare prices on a used Škoda Yeti steering wheel from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used steering wheels vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Škoda Yeti was produced as a single generation running from 2009 to 2017, with a facelift introduced in 2013 that brought styling and trim updates but no fundamental change to the steering column architecture. Wheels from pre-facelift (2009–2013) and post-facelift (2013–2017) cars can share the same spline and hub fitment in many cases, but whether a specific wheel crosses that 2013 boundary without adaptation — particularly if it carries different airbag wiring or controls — is something you should confirm with the breaker against your exact registration. Never assume a swap is plug-and-play without checking the airbag clock-spring compatibility.
Engine size does not affect which steering wheel is fitted to a Škoda Yeti — the wheel is determined by the model generation, trim level, and any factory options such as multifunction controls, not by whether the car has a 1.2 TSI, 1.4 TSI, 1.8 TSI, 2.0 TDI or any other engine. You can safely look at wheels from any engine variant, though you should still match the year range and trim tier to ensure the correct wiring harness and airbag connector. Confirm the specific part number with your breaker against your registration to be certain.
Trim level can affect the steering wheel on the Yeti because higher trims such as Elegance and Elegance Tech were more likely to be fitted with multifunction steering wheels carrying audio, phone, and cruise controls, whereas entry-level S trim typically had a plain wheel without these buttons. The mechanical fitment to the column hub is broadly the same across trims, so a plain wheel will physically mount in a higher-spec car, but you may lose stalk and infotainment functionality if the wiring looms do not match. Tell your breaker which trim your car is and whether you want a multifunction or plain wheel so they can supply the right type.
No — the drivetrain layout, whether front-wheel drive or the 4x4 variant with Haldex all-wheel drive, has no bearing on which steering wheel is fitted, as the steering wheel sits entirely within the cabin and is unrelated to the drivetrain. Focus instead on the production year, facelift or pre-facelift build, and which control buttons your original wheel carried. Confirm the part against your registration with the breaker to ensure the airbag connector and control wiring match your car.
A 2012 car is pre-facelift and a 2015 car is post-facelift, so you are crossing the 2013 facelift boundary where interior updates were made. The hub spline connection may be compatible, but differences in airbag wiring, clock-spring connectors, and multifunction control layouts mean this is not a straightforward swap you should assume will work. Route this question to your breaker with both registrations so they can compare the part numbers and confirm compatibility before you buy.
Colour and material — for example leather versus urethane — do not affect whether a steering wheel will physically fit your Yeti; these are cosmetic differences only. If you are sourcing from a breaker, be aware you may receive a wheel in a different finish to your original, so mention your preference when requesting a quote, though breakers will usually prioritise supplying the correct functional specification first. What actually matters for fitment is the generation, facelift or pre-facelift year, and whether the wheel carries multifunction controls matching your car's setup.