Findapart

Second Hand Škoda Fabia Oxygen Sensor

Need a used Škoda Fabia oxygen sensor? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Fabia oxygen sensor

A used oxygen sensor that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Fabia parts

Used oxygen sensor for other Škoda models

Fitment questions

Does a Škoda Fabia oxygen sensor actually exist, or is it a petrol-only part?

Oxygen sensors exist on both petrol and diesel Fabia variants, though their role differs slightly: on petrol engines they directly regulate the fuel-air mix, while on diesel engines they primarily support emissions monitoring and DPF management. If you have a petrol Fabia you will typically have at least one upstream (pre-cat) lambda sensor and often a downstream sensor too; diesel owners should confirm with the breaker exactly which sensors their engine uses, as fitment varies by emissions era. Either way, the part genuinely exists across the Fabia range, so normal fitment guidance applies.

Will a Fabia Mk1 oxygen sensor fit a Fabia Mk2?

The Fabia Mk1 ran from 1999 to 2007 and the Mk2 from 2007 to 2014, and these generations used different platforms, engine families, and emissions standards, so sensors from one generation will not reliably cross to the other. Engine code is the key factor: even where engine capacities look the same across the boundary, the sensor connector, thread pitch, and calibration may differ to meet the tightening Euro emissions rules of the Mk2 era. Name your engine code when contacting a breaker and ask them to confirm against your registration rather than assuming the years alone tell the whole story.

Does a Fabia Mk2 (2007–2014) sensor fit a Fabia Mk3 (2015 onwards)?

The Mk3 Fabia launched in 2015 and brought updated engine codes and Euro 6 compliance, which is a significant emissions boundary from the Euro 5 Mk2 cars, so swapping sensors across that 2014–2015 boundary carries real risk. A visually similar sensor from the wrong era may not communicate correctly with the ECU, could trigger fault codes, or cause an MOT emissions failure even if it physically fits. Confirm the exact engine code on both vehicles with the breaker before buying.

Does the trim level affect which oxygen sensor I need — for example, does a Fabia SE need a different sensor to a Fabia Monte Carlo?

Trim level — whether SE, Comfort, Monte Carlo, Colour Edition, or any other — does not affect oxygen sensor fitment at all, because the sensor follows the engine and emissions specification, not the interior or exterior specification. A Monte Carlo with the same engine code as an SE of the same year uses an identical sensor. Focus on matching the engine code, fuel type, and model year rather than the trim badge.

I have a 2012 Fabia 1.2 TSI — do I need a specific sensor, and will a 1.2 from a non-turbo Fabia work?

The 1.2 TSI is a turbocharged petrol engine and its oxygen sensor is calibrated to work with that engine's fuelling and exhaust characteristics, which differ from the earlier naturally aspirated 1.2 HTP or 1.2 12v units, so sensors are not interchangeable simply because the displacement matches. Always quote the engine code (for example CBZB for the TSI) when approaching a breaker, and ask them to confirm the sensor position — upstream or downstream — that you need. Do not assume a cheap sensor pulled from any 1.2 Fabia will suit your TSI.

Does it matter whether my Fabia is pre-facelift or post-facelift Mk2 when buying a used oxygen sensor?

The Mk2 Fabia received a facelift around 2010, but for oxygen sensor fitment what matters is the engine code rather than whether the car is pre- or post-facelift, since the facelift was primarily cosmetic and some engine codes carried across the refresh unchanged. However, if the facelift coincided with an engine code change on your particular variant, the sensor specification may have changed too, so it is worth checking your engine code rather than relying on the facelift year alone. Quote your registration and engine code to the breaker so they can pull the right sensor.