Need a used Škoda Citigo oxygen sensor? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used oxygen sensor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, petrol-engined Citigos are fitted with at least one lambda (oxygen) sensor as part of the exhaust and engine management system, used to help the ECU control fuelling and reduce emissions. The Citigo was sold in the UK from 2012 onwards in petrol form only, so every standard UK Citigo will have one. If your Citigo is the all-electric e-Citigo, it has no combustion engine and therefore no oxygen sensor — if that is your model, you will need to check whether your fault relates to a different sensor or system entirely.
The Citigo received a notable update around 2017, and while the core 1.0-litre MPI three-cylinder engine carried over, emissions calibration and associated engine management components can differ between Euro 5 and Euro 6 variants. The sensor connector, thread size, and wiring loom position may be the same, but you should confirm the engine code and emissions standard on both donor and recipient cars with the breaker before buying. Fitting a sensor from the wrong emissions era can cause persistent fault codes or affect your MOT result, so do not assume a straight swap without checking.
No, trim level has no bearing on which oxygen sensor you need — the S, SE, and Elegance trims all share the same petrol engine and exhaust layout, so the sensor itself is identical across them. What matters is the engine code and the emissions standard (Euro 5 or Euro 6) of your specific car, both of which you can find on your V5C or by giving the breaker your registration. Expect minor cosmetic differences on a used sensor such as surface rust or paint marks from the donor car, but these do not affect function.
Give the breaker your full registration number, which lets them look up your exact engine code and emissions specification — for the Citigo this is typically the 1.0 MPI three-cylinder, but the precise engine code and whether the car is Euro 5 or Euro 6 is what determines the correct part. Also let them know whether the fault is with the upstream (pre-cat) or downstream (post-cat) sensor, as these are different parts. Providing the mileage and year helps the breaker source a sensor that is not heavily worn.
The Citigo shares its platform, engine, and many components with the Volkswagen Up and SEAT Mii, so sensors from those models are widely considered interchangeable where the engine code and emissions era match. However, you should still confirm the engine code and Euro standard with the breaker against your specific registration, as small production variations can exist even within the same platform generation. A good breaker familiar with these badge-engineered siblings will be able to cross-reference the part number to verify compatibility before you commit.
A correctly matched and functioning oxygen sensor will not in itself cause an MOT failure, but fitting one from the wrong emissions era — for example, a Euro 5 sensor on a Euro 6 car — can cause the engine management light to illuminate or exhaust emissions to read outside permitted limits, both of which are MOT failures. Always make sure the replacement sensor matches your car's engine code and emissions standard, and clear any fault codes after fitting to confirm the new sensor is working properly. If you are unsure whether the sensor is the root cause of your problem, have the fault codes read before ordering, as the oxygen sensor circuit can flag faults caused by other issues such as exhaust leaks or a failing catalytic converter.