Compare prices on a used Škoda Roomster towbar from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two towbars are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, towbars were available on the Škoda Roomster either as a factory-fitted option or as a genuine Škoda accessory, so used towbars from Roomsters do exist in the breaker market. The Roomster was produced from 2006 to 2015, and towbar availability was an option across the range rather than being restricted to a specific engine or trim level. If you are sourcing a used towbar, it is worth confirming with the breaker that the donor vehicle was actually fitted with one, as not every Roomster will have had it specified.
The Roomster ran as a single generation from 2006 to 2015, with a facelift arriving around 2010 that brought cosmetic and detail changes to the car. Because the towbar mounts to the vehicle's rear subframe and chassis structure, the key question is whether any pressing or structural changes at the facelift affected the mounting points — and you should confirm this directly with the breaker against your registration before buying. In principle, the platform is shared across the full production run, but crossing the pre-facelift and post-facelift boundary is exactly the kind of detail a good breaker can verify by checking your specific VIN.
Trim level does not affect towbar fitment on the Škoda Roomster — the towbar mounts to the same rear chassis structure regardless of whether the car is a Classic, Comfort, Style or Scout. The Scout variant did feature bodywork cladding and a raised ride height, so check with the breaker that the towbar from a standard Roomster clears any lower valance differences if you are fitting to a Scout. Engine choice equally makes no difference to which towbar you need.
The Roomster and Fabia share platform roots, but the Roomster has a notably different rear body structure — it was designed as a compact MPV with a much taller and longer rear end than the Fabia hatchback or estate. This means the towbar is specific to the Roomster and is very unlikely to be a straight swap with a Fabia unit, as mounting points and geometry will differ. Always source a towbar confirmed to have come from a Roomster rather than assuming cross-model compatibility.
Ask the breaker to confirm the towbar type — fixed, detachable or swan-neck — as these differ in how they attach and whether they are interchangeable even between Roomsters. You should also check whether the wiring loom or bypass relay is included, as these are often separated from the bar itself and are easier to source as a matched set. Confirm the breaker is supplying a towbar from a Roomster specifically, and provide your registration so they can cross-reference the donor vehicle against your car.
Fitting a used towbar is a job that many experienced DIYers tackle, but it does require access to the vehicle's underside and correct torque settings for the chassis mounting bolts. The electrical side — connecting a bypass relay or CANbus module to avoid triggering warning lights on modern vehicles — is often the trickier part and may need a auto-electrician if you are not confident with vehicle wiring. A breaker may be able to advise on what electrics came with the unit they are selling, which will help you plan the full installation.