Get quotes for a used or replacement Škoda Kamiq drive shaft. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used drive shaft varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Also known as: half shaft, driveshaft, prop shaft.
The Kamiq has been on sale in the UK from 2019 and received a facelift around 2021-2022, so a 2020 shaft and a 2023 shaft sit either side of that production change — the most important thing to match is the engine code, which you'll find on your V5 or via a VIN check, followed by gearbox type (manual or DSG). Where the two shafts share an identical engine code and gearbox, fitment is likely, but because ancillary and mounting details can change across a facelift you should confirm the part number against your registration with the breaker before buying. Never assume year-to-year compatibility without that check.
No — trim level does not affect drive shaft fitment on the Kamiq; SE, SE L, and Monte Carlo all use the same mechanical underpinnings for a given engine and gearbox combination. What does matter is your engine code and whether you have a manual gearbox or DSG, so quote those to the breaker rather than your trim name. You may find cosmetic differences between parts pulled from different trim cars, but the shaft itself is purely a mechanical component tied to the drivetrain, not the badge.
The engine code is the single most useful piece of information you can supply — it tells the breaker exactly which variant of the 1.0 TSI or 1.5 TSI (or other engine) your car uses, and drive shafts follow the engine code above everything else. You'll find the engine code on your V5 logbook or by running a VIN check; it's typically a three-letter code such as DKR or DPC. Pair that with your gearbox type (six-speed manual or DSG) and whether you need the nearside (NS, left) or offside (OS, right) shaft and the breaker has everything they need.
The Kamiq, SEAT Arona, and VW T-Cross share the MQB A0 platform and in many cases use identical or very closely related drivetrain components for the same engine code and gearbox type, so a shaft from one can sometimes fit another. However, because production runs overlap and minor specification changes do occur between brands and model years, you must confirm the exact part number and engine code match with the breaker against your specific registration before purchasing. Cross-badge buying can be a genuine money-saver, but the breaker needs to verify compatibility — don't rely on badge or platform alone.
No — gearbox type is a key fitment factor, and a shaft from a DSG-equipped Kamiq will not correctly interchange with one from a manual gearbox car even if the engine codes match, because the gearbox output flanges and shaft dimensions differ. Always specify manual or DSG when contacting a breaker, alongside your engine code and which side you need (NS or OS). Fitting the wrong type risks damaging the gearbox or CV joints, so this is not an area to guess on.
The Kamiq launched in the UK in 2019, so cars from that early production year are now beginning to appear at breakers, though stock is still thinner than for more established models. When buying from an early car, confirm the engine code match carefully, as the 2019 build year sits at the start of the model's run and small specification changes occurred as production settled in. Ask the breaker to check the part against your full registration to rule out any early-build variations, and make sure any used shaft comes with the CV boot and retaining clip in sound condition.