Get quotes for a used or replacement Škoda Superb drive shaft. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two drive shafts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Also known as: half shaft, driveshaft, prop shaft.
The Škoda Superb Mk3 runs from 2015 to the present, so both years sit within the same generation, which is a good starting point. However, fitment depends far more on engine code and gearbox type than on year alone, and there were running production changes across this generation. Confirm the engine codes and gearbox types match on both cars, then check the specific part numbers with the breaker against your registration before buying.
The Superb Mk2 ran from 2008 to 2015 and the Mk3 from 2015 onwards, and these are entirely different platforms, so a drive shaft from one will not cross that boundary. Engine codes, subframe geometry, and hub dimensions all changed between generations. Do not attempt to interchange drive shafts across the Mk2 and Mk3 boundary.
Trim level does not affect drive shaft fitment on the Superb — SE, SE Technology, Elegance, Sportline, and Laurin & Klement are all trim designations that relate to equipment and interior specification, not drivetrain engineering. What actually governs fitment is the engine code, fuel type, whether the car is front-wheel drive or four-wheel drive (4x4 models use a different rear shaft arrangement), and whether it has a manual or automatic gearbox. Just be aware that a shaft pulled from a different trim vehicle is mechanically identical if those key details match, but confirm with the breaker against your registration to be certain.
On a front-wheel-drive Superb, the nearside (NS) shaft on the left is typically longer than the offside (OS) shaft on the right, so they are not interchangeable. When asking a breaker for a quote, always specify NS or OS clearly, and also provide your engine code, gearbox type, and whether your car is front-wheel drive or 4x4. Getting the side wrong is one of the most common ordering mistakes, so double-check before confirming.
Engine code matters above everything else for a drive shaft — the Superb has been sold with a wide range of petrol and diesel engines across the same year ranges, and shaft length, CV joint size, and spline count can all differ between engine variants even within the same model year. The engine code is printed on your V5C logbook or can be retrieved via a VIN check, and it is the single most useful detail you can give a breaker when requesting a quote. Year alone is not sufficient and could result in receiving an incompatible part.
Both years fall within the Superb Mk2 generation, which ran from 2008 to 2015, including a facelift in 2013, so you are within the same generation. Fitment still depends primarily on matching engine codes and gearbox types, and the 2013 facelift may have brought minor ancillary or mounting changes that affect compatibility. Confirm the engine codes match and check the specific part numbers with the breaker against both registrations before purchasing.