Findapart

Used Škoda Kodiaq Drive Shaft

Need a used Škoda Kodiaq drive shaft? Request a free quote from UK vehicle dismantlers and compare offers direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Kodiaq drive shaft

A used drive shaft that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Also known as: half shaft, driveshaft, prop shaft.

Other used Škoda Kodiaq parts

Used drive shaft for other Škoda models

Fitment questions

Will a drive shaft from a 2018 Škoda Kodiaq fit a 2021 Škoda Kodiaq?

The Kodiaq first generation ran from 2017 to 2021, so both years sit within the same generation — however, there was a facelift in 2021, which means a 2021 car could be either pre-facelift or post-facelift spec, and ancillary or mounting details can change across that boundary. The most important thing to match is the engine code, which you'll find on your V5 or through a VIN check, along with your gearbox type (manual or DSG/automatic) and whether it's the NS or OS shaft you need. Confirm with the breaker that the part from a 2018 car is a direct fit for your specific 2021 registration before purchasing.

Does the engine code really matter for a Kodiaq drive shaft, or is the year enough?

The engine code matters more than the year — the Kodiaq was offered with several petrol and diesel engines across its production run, and drive shafts are engineered around the engine and gearbox combination rather than the model year badge. Two Kodiaqs from the same year can require completely different drive shafts if they have different engine codes, while two cars from different years sharing the same engine code are far more likely to be compatible. Always supply your engine code (found on the V5 or via a VIN check) when asking a breaker for a quote.

Is a 4x4 Kodiaq drive shaft the same as a 2WD one?

No — the drivetrain layout directly affects which shafts are fitted, so a four-wheel-drive Kodiaq and a front-wheel-drive Kodiaq will not share the same drive shafts. You'll need to tell the breaker whether your car is 4x4 (4WD) or front-wheel drive, as well as specifying the engine code, gearbox type, and whether you need the NS or OS shaft. Never assume interchangeability between drivetrain configurations even within the same engine family.

Does trim level affect which drive shaft a Kodiaq needs — for example, does an SE differ from a Sportline or vRS?

Trim level alone does not determine drive shaft fitment — what matters is the engine code, gearbox type, and drivetrain layout underneath the trim badge. An SE and a Sportline with identical engine codes and gearboxes would take the same drive shaft; the trim names refer largely to equipment and cosmetic differences rather than mechanical ones. The vRS is worth flagging separately because it was offered with a specific high-output engine, so confirm the engine code on any vRS donor car matches yours exactly before proceeding.

Can I use a drive shaft from a Kodiaq with a DSG gearbox on my manual gearbox Kodiaq?

No — the gearbox type is one of the key fitment factors for drive shafts, and a shaft from a DSG-equipped Kodiaq will not be a direct swap onto a manual gearbox car due to differences in the output flange and shaft specifications. Always specify your gearbox type alongside your engine code when contacting a breaker. Fitting an incorrect shaft is a safety risk as well as a waste of money, so treat this as a non-negotiable match criterion.

I need a Kodiaq drive shaft — does it matter whether I specify NS or OS?

Yes, it matters — NS (nearside, the left or passenger side in the UK) and OS (offside, the right or driver's side) drive shafts are different lengths and are not interchangeable. On many Kodiaq variants the NS shaft is longer than the OS shaft due to the position of the differential, so fitting the wrong side will simply not work. Always confirm which side has failed before contacting a breaker, and double-check against your registration to ensure the correct part is sourced.