Compare prices on a used Škoda Kamiq intercooler from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used intercooler varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, but only on the turbocharged petrol and diesel engine variants — which in practice means all UK Kamiq engines, since every engine offered in the Kamiq (the 1.0 TSI, 1.5 TSI petrol and 1.6 TDI diesel) is turbocharged and therefore uses an intercooler. There were no naturally aspirated engines offered in the UK Kamiq, so this part applies across the range. If you are unsure whether your specific variant has one, cross-check your engine code from the V5 or a VIN check with the breaker.
The Škoda Kamiq launched in 2019 and received a facelift in 2021, so a 2019 car sits in the pre-facelift period and a 2023 car is post-facelift — and intercooler fitment is driven by engine code rather than model year. If both cars share the same engine code (for example both running a DLAA or DKJA 1.0 TSI unit), the intercooler is very likely compatible, but whether the mounting brackets or ancillary connections changed across the 2021 facelift boundary is something you should confirm with the breaker against your registration. Supply your engine code when requesting a quote.
No — trim level does not affect intercooler fitment on the Kamiq; the SE, SE Drive, Monte Carlo and any other trim are all mechanically identical in terms of the intercooler, provided the engine code matches. The Monte Carlo is a styling and equipment grade, not a different drivetrain, so the part you need is determined entirely by your engine code and fuel type. Quote the engine code from your V5 to the breaker and trim level can be ignored for this part.
In most cases the gearbox type does not directly affect the intercooler itself, as the intercooler is part of the intake system rather than the transmission. However, some engine and gearbox combinations in the VAG group were offered as distinct engine code variants, so the safest approach is to supply both your engine code and gearbox type to the breaker so they can verify like-for-like. Engine code remains the single most important detail.
The Kamiq, SEAT Arona and VW T-Cross all share the MQB-A0 platform and in many cases share the same engine codes, which means the intercooler can be mechanically identical across these models. This is worth exploring with a breaker if Kamiq-specific stock is limited, but you must confirm the engine codes match exactly, as minor differences in intercooler sizing or pipe routing can exist between applications. Always cross-reference by engine code rather than assuming platform equivalence guarantees fitment.
The most important detail is your engine code, which you can find on your V5 logbook or through a VIN check — for the Kamiq this will be one of the 1.0 TSI, 1.5 TSI or 1.6 TDI family codes. You should also provide the model year and fuel type, and it is worth mentioning your gearbox type in case the breaker needs to narrow down the variant. Trim level and colour are irrelevant for this part and can be left out of your enquiry.