Get quotes for a used or replacement Škoda Enyaq brake master cylinder. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two brake master cylinders are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
No — the Enyaq is a fully electric vehicle built on Volkswagen Group's MEB platform, and it has no conventional hydraulic brake master cylinder in the traditional sense. Electric vehicles use brake-by-wire or electrohydraulic braking systems where the brake pedal input is handled electronically rather than through a conventional master cylinder feeding a hydraulic circuit. If you're looking for a brake-related part, you may actually need the brake booster/vacuum unit, the integrated brake control unit (sometimes called the iBooster or similar), or a brake caliper — confirm exactly which component has failed with your mechanic, then describe it to the breaker against your registration.
On the Enyaq, the braking system uses an electrohydraulic unit that combines functions traditionally split between a master cylinder, servo, and ABS modulator into one integrated assembly — so your mechanic may be referring to this combined unit rather than a standalone master cylinder. This is a completely different component from a conventional master cylinder and is model- and generation-specific, so you'll want to confirm the exact part name and number with your mechanic before approaching a breaker. The Enyaq launched in the UK around 2021, with a facelift arriving in 2024, and breakers will need your exact registration to source the correct integrated braking unit for your build date.
The Enyaq received a facelift for the 2024 model year, and while the MEB platform underpins both generations, electrohydraulic braking system components may have been revised between the two — this is exactly the kind of mid-generation change you should not assume carries over. For any braking system unit, always confirm compatibility across the facelift boundary with the breaker against your specific registration number rather than going on year alone. A good breaker will cross-reference the VIN or reg to check whether the part number matches before quoting.
Trim level alone does not determine the braking system specification on the Enyaq — what matters more is the drivetrain variant, specifically whether your car is the rear-wheel-drive 60 or 85, or the four-wheel-drive iV 80x or RS, as higher-powered and heavier all-wheel-drive variants may use uprated brake hardware. The Sportline and RS trims do tend to correspond with more powerful drivetrains, so in practice trim and drivetrain often align, but it's the power and drivetrain configuration rather than the trim badge itself that drives brake specification. Tell the breaker your exact model variant and power output alongside your registration for the most accurate match.
Because the Enyaq uses an integrated electrohydraulic braking system rather than conventional components, be as specific as possible: give the breaker your full registration, the drivetrain variant (such as 60, 85, iV 80x, or RS), and ideally the part number from your mechanic or a diagnostic report. Avoid asking generically for a 'master cylinder' as breakers familiar with EVs will know this description doesn't apply and may need clarification on exactly which unit you mean. The more precise you can be upfront, the more likely the breaker can source the right part and confirm it against a donor vehicle with a matching spec.