Findapart

Škoda Enyaq Track Rod Replacement Parts

Get quotes for a used or replacement Škoda Enyaq track rod. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Enyaq track rod: what matters

Fitment on a used track rod varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Enyaq parts

Used track rod for other Škoda models

Fitment questions

Does the Škoda Enyaq actually have a track rod?

Yes, the Enyaq has track rods as part of its front steering system — they connect the steering rack to the wheel hub and are a standard component on this model regardless of drivetrain variant. The Enyaq uses conventional front suspension with a steering rack, so track rods (also called tie rods) are present on all versions, including rear-wheel-drive and four-wheel-drive models. If you have front steering or handling issues, a worn or damaged track rod is a legitimate thing to be investigating.

Will a track rod from an early Enyaq (2021-2022) fit a facelifted Enyaq iV (2024 onwards)?

The Enyaq received a facelift for the 2024 model year, and while the underlying platform remained broadly the same, suspension and steering components can be updated at facelifts even when body changes appear minor. Because of this generation boundary, you should confirm with the breaker whether the specific part number from an earlier car crosses over to a post-facelift car before buying. Never assume fitment across a facelift without checking your registration against the donor vehicle's registration.

Does it matter whether my Enyaq is the rear-wheel-drive or four-wheel-drive version when buying a used track rod?

Track rods are a front steering component, and for the Enyaq the front suspension layout is shared across both rear-wheel-drive and four-wheel-drive variants — so the drivetrain difference at the rear does not in itself change the track rod. That said, the higher-powered four-wheel-drive models (such as the RS) may have subtle geometry or component differences, so it is worth confirming the donor car's exact variant with the breaker against your registration to be certain.

Does the trim level matter — for example, will a track rod from an Enyaq 60 fit an Enyaq vRS?

Trim level alone does not affect track rod fitment — Škoda's Enyaq trim names like 60, 80, and vRS relate primarily to battery size, power output, and equipment rather than fundamental changes to the front steering geometry. However, the vRS is a higher-power, higher-performance variant and it is worth asking the breaker to cross-reference part numbers against your registration rather than assuming the parts are identical. The track rod itself will look the same, but small specification differences between power variants are always possible.

Is the track rod on the Enyaq the same on the NS (nearside) and OS (offside)?

On most modern cars including the Enyaq, the nearside and offside track rods are not interchangeable — they are handed components and you must specify which side you need when contacting a breaker. Fitting the wrong side can affect steering geometry and toe settings, so getting the correct NS or OS part matters. Always confirm the side with your breaker and have your wheel alignment checked after any track rod replacement.

How do I know if I need the inner or outer track rod end on my Enyaq?

The track rod assembly on the Enyaq consists of an inner track rod (which threads into the steering rack) and an outer track rod end (also called a tie rod end, which connects to the hub carrier) — these are separate parts and not interchangeable with each other. Common symptoms of a worn outer end include knocking on bumps and uneven tyre wear, while an inner end failure can feel vaguer and show up as excessive steering play. When contacting a breaker, specify inner or outer, plus your NS or OS, and confirm against your registration for the best chance of getting the right part.