Second Hand Peugeot J5 Wishbone
Compare prices on a used Peugeot J5 wishbone from UK breakers. Free part request, no obligation.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Peugeot J5 wishbone
Used wishbones vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
- State whether it's front left or front right
Other used Peugeot J5 parts
- Used Peugeot J5 Subframe
- Used Peugeot J5 Front Cross Member
- Used Peugeot J5 Shock Absorber
- Used Peugeot J5 Wheel Hub
- Used Peugeot J5 Rear Cross Member
- Used Peugeot J5 DPF
- Used Peugeot J5 Window Regulator
- Used Peugeot J5 Wing
- Used Peugeot J5 Alloy Wheels
- Used Peugeot J5 Exhaust System
- Used Peugeot J5 Door
- Used Peugeot J5 Sump
Used wishbone for other Peugeot models
Fitment questions
What years did the Peugeot J5 run, and does this affect which wishbone I need?
The Peugeot J5 was produced from 1981 through to 1994, sharing its platform with the Citroën C25 and Fiat Ducato throughout that production run. Running gear including the front suspension wishbones can vary across this period, so always confirm the exact year of your van with the breaker against your registration plate.
Will a wishbone from an early 1980s J5 fit a later 1990s example?
The J5 ran from 1981 to 1994 and received updates during that time that may have affected suspension components, so a wishbone from the early part of the run cannot be assumed to cross straight over to a later vehicle without checking. Name the year of both the donor and your van to the breaker, who can verify against the part numbers before you commit.
Does the engine size of my J5 affect which wishbone fits?
On the J5, larger and heavier engines can influence the front suspension setup, so the wishbone from a diesel or larger-engined van may not be identical to one from a smaller-engined version. Always tell the breaker your engine size as well as your year so they can pull the correct part.
Does the payload or GVW rating of my J5 matter when sourcing a wishbone?
Yes, this matters on vans like the J5 because higher payload or GVW variants were often built with heavier-duty running gear to handle the extra weight. Check the plate on your van for the exact GVW figure and pass that to the breaker rather than relying on the model name alone, as two J5s from the same year can have different ratings and different suspension components.
Does it matter whether I need the NS or OS wishbone on my J5?
Yes, front wishbones are handed, so the nearside (NS, left as you sit in the driver's seat) and offside (OS, right) are different parts and not interchangeable. Always specify NS or OS clearly when contacting the breaker to make sure you receive the correct side.
My J5 is a higher-spec or panel-van version — does trim level affect which wishbone I need?
Trim or specification level does not affect wishbone fitment on the J5; the suspension components are determined by the generation, engine, and GVW rating rather than by how the van was optioned. Bear in mind that a part pulled from a different body style may look slightly different cosmetically, but confirm the mechanical spec matches by giving the breaker your full details including year, engine, and payload rating.