Findapart

Cheap Peugeot 208 Wishbone

Get quotes for a used or replacement Peugeot 208 wishbone. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Peugeot 208 wishbone

No two wishbones are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Peugeot 208 parts

Used wishbone for other Peugeot models

Fitment questions

What years does the Peugeot 208 first generation cover, and will parts swap freely within it?

The first-generation 208 ran from 2012 to 2019, with a facelift introduced in 2015. Wishbones within the same pre-facelift (2012–2015) or post-facelift (2015–2019) period generally share the same geometry, but whether a wishbone crosses the 2015 facelift boundary is something you should confirm with the breaker against your registration, as suspension pick-up points can change with a refresh. Always specify NS (nearside/left) or OS (offside/right) when requesting a quote.

Will a wishbone from a 2014 208 fit my 2016 208?

These sit either side of the 2015 facelift, so the 2014 car is pre-facelift and the 2016 is post-facelift first-gen. The generation is the same, but fitment across that 2015 boundary is not guaranteed — confirm with the breaker using both registrations to check whether the geometry changed. Specifying NS or OS is essential as left and right wishbones are not interchangeable.

Does the engine size of my 208 affect which wishbone I need?

For the standard 208 range, wishbone design is primarily tied to the generation and facelift phase rather than engine size, so a 1.2 PureTech and a 1.6 BlueHDi of the same period will typically use the same lower wishbone. That said, confirm with the breaker against your registration if you have any doubt, particularly for higher-output variants where suspension tuning can differ. Stating your engine size when requesting a quote gives the breaker useful extra context.

Does my trim level — Active, Allure, or GT Line — change which wishbone I need?

Trim level does not affect wishbone fitment on the 208; Active, Allure, and GT Line all use the same subframe and wishbone geometry within the same generation and facelift period. You may find cosmetic differences on parts sourced from different trims — for example, wheel arch liners or brackets attached to surrounding components — but the wishbone itself is the same. Focus your search on matching the generation, facelift phase, and correct side (NS or OS) rather than trim name.

I need a wishbone for a 208 GTi — is it the same as the standard 208?

The 208 GTi has a more performance-focused suspension setup and may use different wishbone specifications compared with the standard 208 range. You should not assume a wishbone from a mainstream 208 will fit a GTi without checking — confirm with the breaker using your exact registration so they can verify the correct part. Specifying NS or OS remains essential regardless of the variant.

Does a second-generation 208 wishbone fit a first-generation 208?

No — the second-generation 208 launched in 2019 on a completely different platform (CMP), so its wishbones are not compatible with the first-generation car (2012–2019). Always make clear to the breaker which generation your car is, and provide your registration so they can pull the exact vehicle data. The two generations look broadly similar but share very little in the way of running gear.