Nissan X-Trail Wheel Trims Replacement Parts

Wheel trims (plastic hub caps) were fitted to entry-level X-Trail variants across all three UK generations — T30 (2001–2007), T31 (2007–2014), and T32 (2014 onwards) — where steel wheels were standard on lower-spec models. Higher-spec trims came with alloy wheels from the factory, so whether your car has trims at all depends on the spec it left the factory with. If your car currently has alloys, you won't need wheel trims. Check your existing wheels before ordering.

These are from different generations — the 2005 car is a T30 and the 2009 car is a T31 — and the two generations used different wheel sizes and fitment profiles, so T30 trims are very unlikely to clip correctly onto T31 steel wheels. Wheel trims fit by clipping onto the rim, so the diameter and rim profile of the steel wheel must match; confirm the exact wheel size (typically found on the tyre sidewall, e.g. 16-inch) with the breaker before buying. Never assume cross-generation fitment without checking.

Both are T31 generation (2007–2014), so there is a good chance the steel wheel diameter is the same and the trims will clip on correctly. However, the T31 received a facelift around 2010, and while wheel trim compatibility within the same generation is generally good, confirm the exact rim size and clip pattern with the breaker against your registration to be sure. A used set from a T31 is your best starting point.

Trim level itself does not change the physical size or clip pattern of the wheel trims, as fitment is determined by the steel wheel diameter rather than the spec of the car. That said, the Visia was more commonly supplied with steel wheels and trims than the Acenta or higher grades, which were more often fitted with alloys. If you are replacing a set, the cosmetic design of the trim may differ between what your car left the factory with and a used set from a breaker, but it will still fit if the rim diameter matches. Confirm the wheel size with the breaker rather than relying on trim name alone.

X-Trail steel wheels across the generations were most commonly 16-inch, though this can vary by model year and market specification, so check the size stamped on your existing steel wheel rim or listed on your tyre sidewall before searching. Wheel trims must match the rim diameter exactly to clip on securely. Give the breaker your registration and confirm the rim size to make sure you get the right fit.

Engine size does not affect wheel trim fitment on the X-Trail; trims clip onto the steel wheel rim regardless of what is under the bonnet. What matters is the diameter and profile of the steel wheel itself, which is consistent across engine variants within the same generation. Confirm the rim size with the breaker and you should be fine regardless of which engine the donor car had.