Used Nissan Interstar Bumper

The Nissan Interstar was produced from 2002 to 2010, sharing its platform with the Renault Master and Vauxhall Movano of the same era. A facelift was introduced around 2006, which brought changes to the front-end styling including the bumper, grille and lights. When searching for a used bumper, make sure you know whether your van is a pre-facelift (2002–2006) or facelift (2006–2010) model, as these are the key fitment boundaries. If you are unsure which phase your van is, confirm with the breaker against your registration before ordering.

A 2004 Interstar is a pre-facelift model, while a 2008 Interstar falls in the post-facelift period from around 2006 onwards, and the front-end styling changed at that boundary. It is quite possible the bumper profile and mounting points differ between these two phases, but whether this specific panel interchanges across the facelift is something you should confirm with the breaker against your registration rather than assume. Do not rely on a pre-facelift part fitting a facelift van without that check.

No — wheelbase does not affect the front bumper on the Interstar, as the front-end panel is shared across different body lengths within the same generation and facelift phase. Whether you have an L1 or L2 body, the bumper from the same generation and facelift period should be the same part. Just make sure the year of the donor vehicle matches your own pre-facelift or facelift phase, and you can disregard wheelbase when searching.

Trim level does not affect bumper fitment on the Nissan Interstar — the front bumper is the same part across S, SE and SL grades within the same generation and facelift phase. You may find cosmetic differences such as the presence or absence of fog light apertures or parking sensor holes depending on how a particular van was specced, so inspect the donor bumper against your own before buying. The key questions remain generation and facelift period, not trim level, and a breaker should be able to confirm the spec against your registration.

The Interstar, Renault Master and Vauxhall Movano of the 2002–2010 era share the same platform and were built alongside one another, so front-end parts including bumpers do in practice cross over between these badge-engineered vans. However, whether a specific bumper from one of these equivalents fits your exact Interstar — particularly across different facelift phases — is something you should confirm with the breaker against your registration, as subtle differences in fittings or apertures can exist. A good breaker familiar with these vans will be able to cross-reference the parts quickly.

The most important details to give the breaker are your van's registration number, which will confirm whether it is a pre-facelift (2002–2006) or facelift (2006–2010) model — these are the boundaries that matter for bumper fitment. Wheelbase, roof height and trim level do not affect which bumper you need, so you do not need to worry about those. It is also worth telling the breaker about any features on your existing bumper such as fog light cut-outs or parking sensor holes, so the donor part matches your van's spec as closely as possible.