Nissan Cabstar Alloy Wheels Replacement Parts
Get quotes for a used or replacement Nissan Cabstar alloy wheels. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Enter your registration or select your vehicle
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Choosing the right used Nissan Cabstar alloy wheels
Used alloy wheelss vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
Also known as: alloys, rim, rims.
- State the wheel size
- State if you need a single wheel or full set
Other used Nissan Cabstar parts
- Used Nissan Cabstar Central Locking Motor
- Used Nissan Cabstar Battery
- Used Nissan Cabstar Washer Pump
- Used Nissan Cabstar Indicator Stalk
- Used Nissan Cabstar Dual Mass Flywheel
- Used Nissan Cabstar Radiator
- Used Nissan Cabstar Towbar
- Used Nissan Cabstar Front Grille
- Used Nissan Cabstar Horn
- Used Nissan Cabstar Fuel Tank
- Used Nissan Cabstar Spoiler
- Used Nissan Cabstar Brake Servo
Used alloy wheels for other Nissan models
Fitment questions
Will alloy wheels from an older Nissan Cabstar fit a newer one?
The Nissan Cabstar ran across distinct generations, and fitment depends on whether the bolt pattern (PCD) and offset match between the two vehicles — not simply the model name. Within the same generation, alloys will typically interchange, but crossing a generation boundary is less certain, so confirm the PCD and offset of both vehicles with the breaker against your registration before buying.
Does the engine size or payload rating affect which alloy wheels will fit my Nissan Cabstar?
No — engine size and payload variant do not affect alloy wheel fitment on the Cabstar; what matters is the bolt pattern (PCD), offset, and centre bore. You can safely disregard a wheel listed from a different engine or weight-rated Cabstar as long as those three dimensions match your vehicle.
Do alloy wheels from a Nissan Cabstar fit other Nissan light commercials such as the Atleon or Interstar?
Nissan did share platforms and components across its light commercial range, so there is a reasonable chance of cross-model fitment where PCD, offset, and centre bore align. However, because specification can vary between models and production years, you should confirm the exact figures with the breaker against your registration rather than assuming compatibility.
Does trim level affect which alloy wheels will fit my Nissan Cabstar?
Trim level does not affect alloy wheel fitment — the critical factors are PCD, offset, and centre bore regardless of specification grade. Do be aware that alloys sourced from a different trim may have a different finish or spoke style, so there could be a cosmetic difference even when the fitment is correct.
How do I know if a used Cabstar alloy wheel has the right offset for my van?
The offset (ET rating, measured in millimetres) controls how far the wheel sits in or out of the arch, and using a significantly different offset can affect handling and may cause the tyre to catch on bodywork or suspension components. Whether a small offset difference is acceptable depends on the tyre width you are running, so check the exact ET figure with the breaker against your registration rather than assuming a close number will be fine.
Will a Cabstar alloy with a TPMS sensor already fitted work with my van's system?
TPMS sensor compatibility is not something that can be confirmed from the wheel specification alone, as it depends on the sensor protocol and whether it can be programmed to your vehicle's system. Ask the breaker directly whether the sensor is present and what type it is, then verify compatibility with your registration before completing the purchase.