Get quotes for a used or replacement Mercedes-Benz EQS engine mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two engine mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
No — the EQS is a fully electric vehicle and has no internal combustion engine, so there is no traditional engine mount fitted to any variant of this model. Electric motors are mounted differently to combustion engines and use motor mounts or subframe mounting points rather than conventional rubber engine mounts. If you are hearing vibration or noticing movement in the drivetrain, you may actually be looking for a motor mount, subframe mount, or transmission mount — speak to a breaker who specialises in EV or Mercedes-Benz electric vehicles to identify the correct part for your car.
It is almost certainly a misidentification, as the EQS has no combustion engine and therefore no engine mount exists on this model. What you may need instead is a motor mount (supporting the electric drive unit), a subframe mounting bush, or a suspension component — these are the parts that can deteriorate and cause similar symptoms such as clunking or vibration on an electric vehicle. Provide your registration and VIN to the breaker so they can correctly identify which mounting component you actually need.
Depending on the symptoms, the part you need is likely a motor mount (also called a drive unit mount), a subframe bush, or a transmission mount — none of which are described as an engine mount because there is no engine. The EQS uses one or two electric motors depending on whether it is rear-wheel drive or the 4MATIC all-wheel-drive variant, so the number and position of motor mounts differs between those versions. Tell the breaker your exact variant and whether you have the standard RWD or 4MATIC drivetrain to help them locate the correct used part.
Yes — although trim level alone (such as the standard EQS, AMG Line, or AMG EQS) does not typically affect which motor mount is fitted, the drivetrain variant absolutely does, so the key detail is whether your car is rear-wheel drive or 4MATIC all-wheel drive, and which motor output variant you have. The EQS (Z297 platform) launched in 2022 in the UK, so the generation is relatively consistent, but mid-production changes to mounting hardware are possible and should be confirmed with the breaker against your specific registration. Always supply your VIN or registration so the breaker can verify the exact motor mount needed for your vehicle.