Mercedes-Benz EQS Windscreen Replacement Parts

The Mercedes-Benz EQS (W297) launched in 2021 as a single generation, so there is no classic generation-to-generation boundary to navigate in the way you might find on older models. That said, Mercedes did introduce running changes and updates during the production run, and windscreens on later cars may carry different ADAS camera or sensor brackets compared with early examples. Always confirm with the breaker against your registration before buying.

No, the trim or powertrain variant does not affect windscreen fitment on the EQS – a screen from a 450+ will physically be the same glass shape as one from a 580 4MATIC. What does matter is whether the donor screen has the correct heating elements and ADAS camera bracket configuration to match your car, so focus on those features rather than the trim badge. Ask the breaker to confirm those details against your registration.

Check your current windscreen for fine heating filaments running through the glass – heated screens are noticeably common on the EQS given its premium specification. If your car has a heated screen and you fit an unheated replacement, you will lose the de-icing function, which on an electric vehicle can also affect range efficiency. Tell the breaker whether your screen is heated so they can source a matching unit.

Yes, this is one of the most important things to get right on an EQS – the camera and sensor bracket is bonded into the glass, and if it does not match your car's specific ADAS setup the camera may not calibrate correctly or mount safely. The EQS can be fitted with different driver-assistance system configurations, so you cannot assume any EQS screen will match yours. Confirm the exact bracket type with the breaker against your registration number before ordering.

Physically the glass may fit, but you would permanently lose the screen heating function, and on a car like the EQS this can also affect ADAS sensor performance in cold or damp conditions. It is worth paying the extra to get a like-for-like heated screen rather than retrofitting heating, which is not practical on laminated automotive glass. The breaker should be able to advise on what heated units they have available.

Give them your full registration number so they can look up your exact build specification – the key things they need to match are whether your screen is heated, and which ADAS camera or rain sensor bracket configuration is fitted. The trim level and motor variant are not relevant to fitment and you do not need to mention them. Providing your VIN as well as the registration will help the breaker pinpoint the correct screen if there is any ambiguity.