Hyundai ix35 Wishbone Replacement Parts

The Hyundai ix35 ran from 2010 to 2015 in the UK, with a facelift arriving in 2013 that brought styling updates to the front end. For wishbones, the key question is whether the suspension geometry or mounting points changed at that 2013 facelift point, which is worth confirming with the breaker against your registration rather than assuming all years share the same part. Engine size can also affect which wishbone you need, so have that detail ready too.

The ix35 was facelifted in 2013, so a 2011 car is pre-facelift and a 2014 is post-facelift, meaning these sit either side of a known model boundary. Wishbones are running gear components and suspension geometry can change at a facelift, so you should not assume they will swap straight over. Confirm with the breaker using both registrations so they can check whether the part numbers match across that 2013 boundary.

Trim level does not affect wishbone fitment on the ix35 - Classic, SE, and Premium are cosmetic and equipment-based differences rather than changes to the suspension geometry. You can safely source a wishbone from any trim level as long as the generation, engine size, and side (NS or OS) match your car. Do bear in mind you may receive a part with minor cosmetic differences such as different paint or finish, but that has no impact on function.

Engine size can matter for wishbones because heavier or more powerful variants sometimes use uprated suspension components with different geometry or mounting hardware. The ix35 was offered with a range of petrol and diesel engines of different sizes, so it is worth telling the breaker which engine is in your car alongside the year. This gives the dismantler the best chance of supplying a part that matches your setup rather than one from a different engine variant.

Yes, it matters - nearside (NS) is the passenger side and offside (OS) is the driver's side, and wishbones are side-specific, so always confirm which corner needs replacing before contacting a breaker. If you are unsure, your garage or a quick look at the suspension while the car is on a ramp will tell you. Always specify NS or OS clearly when requesting a quote to avoid receiving the wrong part.

The first-generation Hyundai Tucson (2004-2010) and the ix35 (2010-2015) are related but are different generations with different bodyshells, so parts do not automatically interchange between them. Whether a specific wishbone from one will fit the other depends on whether Hyundai carried over identical geometry and mounting points, which is not something to assume. Confirm cross-model compatibility with the breaker using both registrations before purchasing.