Cheap Hyundai ix35 EGR Valve

Yes, but only on diesel variants — the ix35 was sold in the UK with 1.7 CRDi and 2.0 CRDi diesel engines, and both use an EGR valve as part of their emissions system. The petrol-engined ix35 (2.0 GDi) does not have an EGR valve, so if your car is petrol you won't find this part fitted. Check your V5C or ask your breaker to confirm your engine code before ordering.

This is a critical year boundary to be aware of: the Hyundai ix35 ran from 2010 to 2015 in the UK as a single generation, but emissions and engine specification updates mean parts from early and late cars may not be directly interchangeable even if they look similar. The engine code on your car (visible on the V5C or under the bonnet) is the key detail — a 1.7 CRDi unit from 2012 and a 1.7 CRDi unit from 2015 may share some components but confirm the exact part number with your breaker against your registration before buying.

No, trim level makes no difference to EGR valve fitment on the ix35 — S, SE, Premium and Premium SE are cosmetic and equipment packages and do not change the engine or emissions hardware. What matters is your engine code and fuel type (1.7 CRDi or 2.0 CRDi), not what badge is on the tailgate. Just make sure the breaker matches the part to your engine code rather than your trim name.

No — the drivetrain layout (front-wheel drive versus four-wheel drive) has no effect on EGR valve fitment. The EGR system is part of the engine and emissions hardware, which is the same regardless of whether your ix35 drives two or four wheels. Focus on matching the engine code and model year when speaking to your breaker.

The ix35 shares its platform with the first-generation Tucson (JM) and the Kia Sportage, and there is some engine family overlap, but EGR valves are emissions-sensitive components where small calibration or connector differences can matter. Whether a specific unit from a Tucson or Sportage will physically and functionally interchange with your ix35 is strong confirm-with-breaker territory — give the breaker both registrations and ask them to cross-reference part numbers before committing.

EGR valves are calibrated to specific engine variants and their emissions requirements, so fitting a valve from a different engine code — even one that looks identical — risks poor running, fault codes, or an MOT emissions failure. The 1.7 CRDi and 2.0 CRDi units in the ix35 are not interchangeable with each other, and differences can also exist within the same engine family across model years. Always give your breaker your full registration and ask them to confirm the part against your engine code rather than relying on visual similarity alone.