Used Ford B-Max Fog Light

Fog lights were not standard on all B-Max variants — they were an option or fitted to higher trim levels such as Titanium, so some cars left the factory without them entirely. If your B-Max did not originally have front fog lights, the bumper may also lack the correct apertures or wiring, which is worth checking before buying a used unit. Confirm with your breaker whether your specific registration was factory-fitted with fog lights before ordering.

The Ford B-Max ran as a single generation from 2012 to 2017, but there was a facelift in 2015 that updated the front end including the bumper and fog light surrounds. A 2013 unit is pre-facelift and a 2016 unit is post-facelift, so they may not interchange directly — confirm with the breaker against your registration before buying, as the physical fitting and lens style can differ across that boundary.

Trim level itself does not change the fog light unit on the B-Max — the same fog light fits across Zetec, Zetec Navigator, Titanium and other trims within the same facelift period, provided the car was factory-fitted with fog lights at all. However, be aware that lower trims may have had blanked-off bumper apertures rather than working fog lights, so the part you need may differ if you are retrofitting rather than replacing. Always confirm against your registration with the breaker.

Yes — front fog lights are handed, so the nearside (NS, passenger side) and offside (OS, driver side) are not interchangeable. When contacting a breaker, make sure you specify which side you need to avoid being sent the wrong unit.

The B-Max launched in 2012 and the facelift arrived in 2015, so fog lights from any 2012–2014 car should be from the same pre-facelift front end and are likely to be compatible with your pre-facelift B-Max. That said, confirm the part against your registration with the breaker, as small running changes can occasionally occur within a model cycle that affect fitment.

A used fog light from a breaker is a perfectly sensible option for a like-for-like replacement, provided you match the correct facelift period (pre-2015 or 2015-onwards) and the correct side (NS or OS). Check that the replacement lens is in good condition with no moisture ingress, as used units can sometimes suffer from seal deterioration. Confirm the part suits your specific registration with the breaker before purchasing.