Used Ford Fusion Fog Light

Fog lights were not standard across the entire Ford Fusion range and were only fitted as an option or on higher trim levels such as Zetec and above - many entry-level Fusions left the factory without them, leaving blanking plugs in the bumper instead. If your car currently has blanks rather than fog lights, retrofitting is possible but you would also need the wiring and switch, not just the light unit itself. Confirm with the breaker whether the unit they have comes from a fog-light-equipped car and check your own bumper for the cut-out before ordering.

The Ford Fusion was produced from 2002 through to 2005 in its original form, with a facelift arriving for the 2005 model year that revised the front end including the bumper, grille and light clusters. Because the facelift changed the front-end panels, a fog light from a pre-facelift car may not directly swap into a post-facelift bumper and vice versa. Name the facelift boundary to the breaker and ask them to confirm the part against your exact registration rather than just the year.

Trim level does not affect the physical shape or fitment of the fog light unit itself, as the bumper and fog light aperture are shared across trim grades within the same generation and facelift period. The difference trim makes is whether your car was originally fitted with fog lights at all, since lower grades sometimes had blanked apertures instead. As long as both cars are from the same facelift period, the unit should be compatible regardless of trim name.

Engine choice has no bearing on fog light fitment on the Fusion - the front bumper and fog light units are the same regardless of whether the car has a 1.25, 1.4, 1.6 petrol or a diesel engine. The only things that matter for fitment are the generation and whether the car is pre- or post-facelift. Tell the breaker your registration and confirm the facelift period rather than worrying about engine specification.

No - the NS (passenger side, left) and OS (driver side, right) fog lights are handed and are not interchangeable with each other. When requesting a quote from a breaker, make sure you specify clearly which side you need, using either NS/OS or left/right when facing the front of the car. Getting the wrong side is a common and easily avoided mistake.

The Fusion was built on the same basic platform as the Mk5 Fiesta, but the two cars have different front bumper designs and the fog light housings are shaped to fit each car's specific bumper aperture, so they are not a straightforward swap. It is best to source a fog light specifically listed as coming from a Fusion rather than a Fiesta, even if some internal components look similar. Always confirm the part against your Fusion's registration with the breaker before purchasing.