Compare prices on a used Škoda Yeti parking sensor from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used parking sensor varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
The Škoda Yeti ran from 2009 to 2017, with a facelift in 2013 that updated the front and rear bumper styling — and because parking sensors sit in the bumper, sensors from a pre-facelift car (2009–2013) are unlikely to locate correctly in a post-facelift bumper (2013–2017). Confirm the exact bumper generation with the breaker against your registration before buying. Never assume a sensor from across the 2013 facelift boundary will be a straight swap.
Yes, parking sensors were available on the Škoda Yeti, typically fitted to higher specification trim levels as standard or as a factory option on others. Rear parking sensors are the most common, while front sensors were also available on some variants. If your car was not originally fitted with sensors, retrofitting from a breaker is possible but may require additional wiring and ECU work.
For the sensors themselves, trim level does not affect whether a sensor will physically fit in the same bumper from the same generation. However, be aware that higher trims like Elegance or Laurin & Klement were more likely to have sensors factory-fitted, so sourcing from those trim levels gives you more confidence the system is complete. Confirm the bumper generation matches your car rather than worrying about which trim the donor was.
This crosses the 2013 facelift boundary, which brought revised front and rear bumpers, so a sensor from a 2012 pre-facelift Yeti may not align correctly in the bumper of a 2015 post-facelift car. The sensor units themselves are sometimes electronically compatible, but physical fitment in the bumper holes is the real concern here. Confirm this with the breaker against both registrations before purchasing.
No — engine type has no bearing on parking sensor fitment, so it does not matter whether the donor car had a petrol or diesel engine. What matters is that the bumper generation matches, meaning both cars should be either pre-facelift (2009–2013) or post-facelift (2013–2017). Focus your questions to the breaker on the model year and bumper style rather than the engine.
The sensor units themselves (the cylindrical pods) are often shared across Škoda and Volkswagen Group models, so it is possible that sensors from a contemporaneous Octavia, Superb, or Volkswagen Tiguan could match electrically. However, bumper hole diameter, spacing, and colour coding all need to match your Yeti's bumper. Route this question to the breaker with your registration so they can confirm the part numbers align before you commit.