Findapart

Second Hand Škoda Yeti Inlet Manifold

Get quotes for a used or replacement Škoda Yeti inlet manifold. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

What to check when buying a used Škoda Yeti inlet manifold

A used inlet manifold that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:

Other used Škoda Yeti parts

Used inlet manifold for other Škoda models

Fitment questions

Does the Škoda Yeti actually have an inlet manifold?

Yes, all Škoda Yeti engines have an inlet manifold — it is a fundamental part of any internal combustion engine, both petrol and diesel, carrying the air-fuel mixture or air charge into the cylinders. The exact design differs significantly between petrol and diesel variants, and between different engine families, so knowing your engine code is essential before sourcing a used one from a breaker.

Will an inlet manifold from a 2010 Yeti fit my 2014 Yeti?

The Škoda Yeti ran as a single generation from 2009 to 2017, with a facelift in 2013 that updated styling and some mechanical ancillaries. Both sit within the same broad platform, but the 2013 facelift is a genuine production boundary where mounting points and ancillary connections can change on some engine variants, so whether a pre-2013 manifold crosses to a post-2013 car is something you should confirm with the breaker against your specific registration and engine code rather than assume it will bolt straight on.

Does it matter whether my Yeti is 2WD or 4WD when buying an inlet manifold?

No — the inlet manifold is determined by the engine, not by the drivetrain layout. A 2WD Yeti and a 4WD Yeti fitted with the same engine code will use the same inlet manifold, so you can safely ignore the drivetrain specification when searching and focus entirely on matching the engine code from your V5 or a VIN check.

I have a 1.2 TSI Yeti — will an inlet manifold from a 1.4 TSI fit?

No, these are different engines with different inlet manifold designs, even though both are turbocharged petrol units within the Volkswagen Group family. You need to match on engine code specifically — for example, a CBZB 1.2 TSI and a CAXA 1.4 TSI are not interchangeable — so always give the breaker your exact engine code to make sure you get the right part.

Does the trim level affect which inlet manifold I need — for example, S, SE, or Elegance?

No, trim level makes no difference to the inlet manifold fitted to your Yeti. The S, SE, and Elegance trims are distinguished by equipment and interior specification, not by engine hardware, so the part that matters is your engine code. That said, cars at different trim levels were sometimes offered with different engine options, so confirm your engine code from the V5 rather than relying on trim alone.

Does it matter whether my Yeti is petrol or diesel when sourcing an inlet manifold?

Yes, absolutely — petrol and diesel inlet manifolds are completely different parts and are not interchangeable. Diesel manifolds typically handle air only and are often fitted with swirl flaps or EGR connections, while petrol manifolds vary by whether the engine is naturally aspirated or turbocharged. Always tell the breaker your fuel type and your engine code together to ensure you receive the correct manifold for your vehicle.