Compare prices on a used Škoda Roomster egr valve from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Fitment on a used egr valve varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:
Yes, but only on the diesel variants — the 1.4 TDI, 1.6 TDI, and 1.9 TDI engines all use an EGR (Exhaust Gas Recirculation) valve as part of their emissions management. The petrol-engined Roomsters (1.2 HTP, 1.4 MPI, and 1.6 MPI) do not use an EGR valve in the same way, so if you have a petrol model you are unlikely to need this part. Always confirm your engine code from your V5C or the plate under the bonnet before ordering.
The Roomster was produced from 2006 to 2015 as a single generation, with a facelift arriving in 2010 that brought revised engines and updated engine codes. An EGR valve from a pre-facelift car (2006–2010) may not match one from a post-facelift car (2010–2015) even if the engine displacement looks the same, because the engine codes and emissions calibration changed across that boundary. Match by engine code — for example, BNM and BMS codes from the earlier cars differ from the CEVA and CFWA codes on later ones — and confirm the specific interchange with the breaker against your registration.
No, trim level makes no difference to EGR valve fitment on the Roomster — Classic, Comfort, Elegance, and Scout are all built on the same platform and use the same engines regardless of trim. What matters solely is your engine code and model year, which determine the correct valve specification and emissions calibration. You may find a Scout-sourced part at a breaker described differently, but if the engine code matches yours it is the same component.
No — the 1.4 TDI and 1.6 TDI are different engine families with different EGR valve specifications, so the parts are not interchangeable despite both being diesel Roomsters. You must match the part to your exact engine code, such as CEVA or CFWA for the 1.6 TDI, rather than just the fuel type or displacement. Confirm the exact code with your breaker to make sure you get the right valve.
The Roomster shares its PQ24 platform and many engine codes with other VAG group cars of the same era, including the SEAT Ibiza and VW Polo, so there is a reasonable chance of compatibility if the engine codes match exactly. However, calibration differences and model-year emissions boundaries mean you should not assume a match just because the engine size or even the code looks similar. Give your engine code and registration to the breaker and ask them to cross-reference before purchasing.
Yes, potentially — an EGR valve from a different emissions specification can affect how the engine manages recirculated exhaust gases, which may cause the car to run incorrectly or produce emissions outside acceptable limits at MOT. Diesel Roomsters span both Euro 4 and Euro 5 emissions standards depending on year and engine, and these eras used different valve and sensor specifications. Always match the replacement part to your car's original engine code and emissions standard, and confirm this with the breaker.