Get quotes for a used or replacement Škoda Fabia egr valve. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
No two egr valves are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:
Yes, but only on certain engine variants — EGR valves are fitted to turbocharged diesel engines in the Fabia range and to some petrol engines where exhaust gas recirculation is used for emissions control. Naturally aspirated petrol engines in older Fabia generations are less likely to carry one, so the key thing is your engine code and fuel type rather than the model name alone. When sourcing a used EGR valve, always confirm your exact engine code with the breaker so they can match the right unit.
The Fabia Mk1 ran from 1999 to 2007 and the Mk2 from 2007 to 2014, and these generations used different engine families, so an EGR valve from a Mk1 is very unlikely to be compatible with a Mk2 even if both are diesel. The emissions standards changed significantly across that boundary — Euro 3 and Euro 4 era engines in the Mk1 differ from the Euro 5 engines introduced in the Mk2 — and fitting the wrong unit can cause running problems or MOT failures. Always give the breaker your registration and engine code to confirm compatibility across that generational boundary.
Yes, this is one of the most important boundaries to respect — the Mk3 Fabia moved to the MQB-A0 platform and different engine generations, including Euro 6 units, which use a different EGR setup to the Euro 5 engines in the Mk2. A part pulled from a 2013 Mk2 diesel is unlikely to cross over to a 2016 Mk3 diesel even if the displacement looks the same on paper. Confirm your engine code and emissions standard with the breaker before agreeing a price.
Trim level makes no difference to EGR valve fitment — the valve is determined by your engine code and fuel type, not whether your car is a standard Ambition, an SE, or a sportier Monte Carlo or vRS. The vRS models do use specific higher-output engines, so if you have a vRS confirm that engine code carefully as it may not share the same EGR valve as a standard 1.2 TDI Ambition, but that is an engine difference rather than a trim difference. Tell the breaker your engine code and they will identify the correct part regardless of badge.
Possibly, because VAG group engines are shared across brands and some EGR valves do cross over between Fabia, Polo, Ibiza, and Roomster if the engine code matches exactly. However, emissions-era differences mean a 1.6 TDI from a later model year with Euro 5 or Euro 6 calibration may use a revised valve even under the same displacement badge, and fitting the wrong one can affect emissions performance and MOT outcome. Give the breaker your precise engine code — not just '1.6 TDI' — and let them verify the match before you commit.
Body style has no bearing on EGR valve fitment — the valve is part of the engine and emissions system, which is identical regardless of whether the car is a hatchback or estate. As long as the engine code and emissions era match, a valve sourced from a Fabia Estate is just as suitable as one from a hatchback. Confirm the engine code match with the breaker and you can buy with confidence on that point.