Findapart

Second Hand Škoda Yeti Wishbone

Compare prices on a used Škoda Yeti wishbone from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Buying a used Škoda Yeti wishbone: what matters

Fitment on a used wishbone varies by vehicle, so a bit of detail goes a long way. Our request form covers what breakers need to know, so every quote you get back is for the correct part:

Other used Škoda Yeti parts

Used wishbone for other Škoda models

Fitment questions

What years did the Škoda Yeti run, and are there any important fitment cut-off points for the wishbone?

The Škoda Yeti ran from 2009 to 2017 in the UK, with a facelift introduced in 2013 that brought styling and some mechanical updates. For wishbones, the key boundary to be aware of is that pre-facelift (2009–2013) and post-facelift (2013–2017) cars may differ in front suspension geometry, so always confirm with the breaker that the part they have matches your specific registration rather than assuming any Yeti wishbone will cross that 2013 line.

Will a wishbone from a 2012 Yeti fit my 2015 Yeti?

Your 2012 car is a pre-facelift Yeti and your 2015 is a post-facelift model, so they sit either side of the 2013 facelift boundary. The wishbone design may or may not interchange across that boundary, so you should not assume a straight swap — give the breaker both registrations and ask them to verify against the part numbers before you commit.

Does engine size matter when buying a used Yeti wishbone?

For the Yeti, the front wishbone design is primarily tied to the generation and facelift status rather than engine size in most cases, but heavier or more powerful variants can sometimes use uprated front suspension components. It is worth telling the breaker your engine size alongside your registration so they can cross-reference and confirm the part is the correct one for your exact car.

Does it matter whether I buy a wishbone from an S, SE, or Elegance trim Yeti?

Trim level — whether S, SE, Elegance, or any other — does not affect which wishbone is fitted; the geometry is determined by the generation and any sport or height suspension variant, not the trim name. That said, if you are sourcing from a car with a different suspension specification (for example a lowered or sport setup), confirm with the breaker that the donor car's suspension matches your standard setup, as sport or lowered variants may carry different rates or geometry.

Does it matter which side I order — can I fit a nearside wishbone on the offside?

No — wishbones are handed, meaning the nearside (NS, passenger side) and offside (OS, driver side) are not interchangeable. Always specify which side you need when contacting the breaker, and double-check this against the part they are quoting to avoid receiving the wrong one.

Do 4WD and 2WD Yetis use the same front wishbone?

The Yeti was offered in both front-wheel-drive and four-wheel-drive configurations, and while the front suspension layout is broadly similar, there can be differences in front subframe and wishbone specifications between the two drivetrains. Confirm with the breaker whether the donor car matches your drivetrain as well as your registration to make sure the wishbone is the right fit.