Get quotes for a used or replacement Škoda Scala cylinder head. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used cylinder head that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
The Scala has been sold as a single generation since its 2019 launch, with a facelift arriving in 2022, so most of the engine family is consistent across the run — but ancillary fittings and porting details can change at a facelift boundary, and whether a pre-2022 head crosses cleanly to a post-2022 car is something you should confirm with the breaker against your registration. The engine code is the most important detail to match, and you'll find it on your V5 or via a VIN check. Never assume a visual match means a mechanical one.
Engine code matters above everything else for a cylinder head — two Scalas from the same year can carry different codes depending on power output or market spec, and heads are machined specifically to the block and valvetrain of that code. Fuel type (petrol or diesel) is a hard boundary, but even within petrol you need to distinguish between codes such as DPCA, DKRF, or others that share displacement but differ internally. Pull the code from your V5 or a VIN check and give it to the breaker before anything else.
No — trim level makes no difference to cylinder head fitment on the Scala; Active, SE, and Monte Carlo are cosmetic and equipment grades built around the same engine family, not separate mechanical specifications. What determines the correct head is the engine code, which can be identical across all three trims. You may find cosmetic differences in the engine bay on a donor car (covers, clips, brackets) but the head itself follows the engine code, not the badge.
The Scala shares its MQB-A0 platform and several engine codes with other VAG Group cars including the VW Polo, SEAT Ibiza, and SEAT Arona, so a head from a matching engine code in one of those vehicles is potentially compatible. That said, confirm the full engine code character-for-character with the breaker, as ancillary mounting points or emission-spec differences can catch you out. A breaker experienced with VAG Group parts will be best placed to advise on cross-platform fitment against your specific registration.
A cylinder head itself is a mechanical component and does not carry electronic coding, so in most cases swapping a like-for-like head does not require ECU pairing. However, if any sensors, camshaft actuators, or other electronically managed components are transferred with or built into the head, there may be calibration steps involved — confirm the exact scope of work with your fitting garage and check with the breaker whether ancillaries are included. We'd recommend discussing this with your mechanic before purchasing.
Gearbox type does not directly change the cylinder head specification, but it is a useful cross-check because some engine codes were paired exclusively with a manual or DSG gearbox in certain markets, helping to confirm you're looking at the right variant of engine. The head itself is determined by the engine code, not the gearbox. Give the breaker both the engine code and gearbox type so they can source from the right donor vehicle.