Compare prices on a used Škoda Octavia lambda sensor from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
A used lambda sensor that fits one vehicle won't always fit another - even within the same model range. These questions help breakers match stock to your exact vehicle before they quote:
Yes, lambda sensors (oxygen sensors) are fitted to all petrol Octavia engines as standard, and also to diesel variants — diesels typically carry a wideband lambda sensor as part of their emissions management system. If your Octavia is a petrol, expect at least one sensor before the catalytic converter and often one after; diesel setups vary by engine and emissions era. The sensor tells the ECU how to manage fuelling and is essential for emissions compliance and MOT.
The Mk2 Octavia ran from 2004 to 2013 (facelift around 2008–2009), while the Mk3 ran from 2013 to 2020 (facelift 2017), and these generations use different engine families, exhaust layouts, and emissions standards — so a like-for-like swap across that 2013 boundary is unlikely to work correctly even if a sensor looks physically similar. Fitment depends primarily on engine code and whether the engine is Euro 5 or Euro 6, which changed significantly between generations. Always confirm with the breaker using your exact registration and engine code before buying.
Trim level — whether SE, SE L, Elegance, or vRS — does not affect lambda sensor fitment; the sensor is determined by the engine code and emissions specification, not the interior or equipment grade. The vRS uses higher-output versions of engines also found elsewhere in the Octavia range, so if the engine code matches, the sensor position and specification should align. Confirm the engine code with the breaker rather than relying on trim name alone.
The Mk3 Octavia received its facelift in 2017, so a 2017 car could be either the pre- or post-facelift model depending on when in the year it was built and registered. The facelift brought some engine and emissions updates, particularly around Euro 6 compliance, which can affect sensor specification. Check your engine code on the V5C or with your dealer, and share it with the breaker so they can match the correct sensor.
Yes, this matters considerably — Euro 5 and Euro 6 engines can use different sensor types, connector configurations, and calibrations, and fitting the wrong one can cause incorrect fuelling, warning lights, and an MOT emissions failure. Euro 6 became the standard for new registrations from September 2015, so Mk3 Octavias registered after that point are generally Euro 6, though the exact engine code is the reliable guide. Always tell the breaker your engine code and registration so they can confirm the correct emissions-era sensor.
No — petrol and diesel lambda sensors are not interchangeable; they operate on different principles, serve different roles in the exhaust system, and use different connectors and calibrations. Diesel Octavias use sensors suited to lean-burn exhaust conditions, while petrol sensors are calibrated for a different air-fuel ratio range. Always specify your fuel type as well as your engine code when asking a breaker for a quote.