Findapart

Cheap Škoda Kodiaq Gearbox Mount

Get quotes for a used or replacement Škoda Kodiaq gearbox mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Choosing the right used Škoda Kodiaq gearbox mount

Used gearbox mounts vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:

Other used Škoda Kodiaq parts

Used gearbox mount for other Škoda models

Fitment questions

Does a gearbox mount from an earlier Škoda Kodiaq fit a later one – does the 2017–2021 pre-facelift part cross over to the 2021-onwards facelift?

The Kodiaq Mk1 ran from 2017 to 2021, with a facelift arriving for the 2021 model year; the Mk2 generation followed from 2024. Within the pre-facelift Mk1 (2017–2021) the mount is likely to be consistent where the engine code matches, but whether a pre-facelift mount crosses to the facelifted Mk1 (2021 onwards) should be confirmed with the breaker against your registration, as mounting and ancillary changes can occur mid-production. Always quote your engine code when asking for a quote.

What details do I need to give a breaker when buying a used Kodiaq gearbox mount?

The single most important detail is your engine code, which you'll find on your V5C or via a VIN check – this tells the breaker far more than the year or trim level alone. You should also confirm whether your Kodiaq has a manual or automatic gearbox, and whether it's front-wheel drive or four-wheel-drive (4WD), as these factors can affect which mount is required. Having your registration to hand will help the breaker cross-reference everything accurately.

Does the Kodiaq gearbox mount differ between the 2.0 TDI and the 1.5 TSI engines?

Yes, the gearbox mount can vary between different engine codes even within the same model, because the mount is designed around the specific engine and gearbox combination rather than the badge on the car. A 2.0 TDI and a 1.5 TSI are different engine families with different gearbox pairings, so the mounts may not be interchangeable. Always supply your exact engine code (for example DFGA or DADA) rather than just the displacement when requesting a quote from a breaker.

Does my Kodiaq's trim level – Scout, Sportline, SE, or Edition – affect which gearbox mount I need?

No, trim level does not affect gearbox mount fitment on the Kodiaq – Scout, Sportline, SE, and Edition are all cosmetic and equipment-level distinctions rather than mechanical ones. What determines the correct mount is your engine code, gearbox type (manual or automatic), and drivetrain layout. You may find parts pulled from a different trim on the donor vehicle, and that is perfectly fine as long as the mechanical specification matches yours.

Does the Kodiaq even have a gearbox mount – is it the same as an engine mount?

Yes, the Kodiaq does have gearbox mounts (also called transmission mounts) – these are separate rubber-and-metal bushings that locate and cushion the gearbox within the engine bay, and they are distinct from the engine mounts themselves. All Kodiaq variants that carry a gearbox – whether manual or DSG automatic – have at least one gearbox mount, so this is a genuine and commonly replaced part. If you're unsure whether it's the gearbox mount or an engine mount that has failed, a breaker or mechanic can help you identify the correct component from your symptoms.

Can I use a Kodiaq gearbox mount from a 2019 car on my 2023 Kodiaq?

A 2019 Kodiaq sits in the pre-facelift Mk1 generation (2017–2021), while a 2023 Kodiaq is a facelifted Mk1 (2021–2024 production), so you are crossing a generation boundary where mounting specifications may or may not have changed. If the engine code is identical between both cars and the gearbox type matches, there is a reasonable chance of compatibility, but you should confirm this directly with the breaker against both registrations before purchasing. Never assume fitment across a facelift boundary without that check.