Compare prices on a used Škoda Kamiq gearbox mount from UK breakers. Free part request, no obligation.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used gearbox mounts vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Škoda Kamiq was introduced in the UK in 2019 and received a facelift in 2021, so there is a pre-facelift (2019–2021) and a post-facelift (2021-on) generation boundary to consider. The gearbox mount is a genuine part on the Kamiq, as it is a front-wheel-drive model using transversely mounted petrol and diesel engines that all require engine and gearbox mounting systems. Whether a mount from the pre-facelift crosses correctly to the post-facelift depends on whether any ancillary or mounting changes were made at that point, so confirm this with the breaker against your registration before buying.
Yes, the engine code is the single most important detail for sourcing the correct gearbox mount on the Kamiq, as different engines use different gearboxes and the mount is matched to that specific drivetrain combination. The Kamiq has been offered with a range of engines including the 1.0 TSI and 1.5 TSI petrols and the 1.6 TDI diesel, each of which can pair with either a manual or DSG automatic gearbox, and mounts can differ across these combinations. You will find your engine code on your V5 logbook or via a VIN check, and supplying it to the breaker is the most reliable way to ensure you get the right part.
Yes, gearbox type matters because a manual gearbox and a DSG automatic are physically different units and the mounts are designed around the specific gearbox casing and weight distribution. Make sure you tell the breaker whether your Kamiq has a manual or DSG before they source a mount, as fitting the wrong type is unlikely to work correctly. Supplying your engine code alongside your gearbox type gives the breaker everything they need to find a compatible unit.
Trim level — whether that is SE, SE L, or Monte Carlo — does not affect gearbox mount fitment, as this is a mechanical component determined by engine code and gearbox type, not by the specification level of the car. All three trims can be fitted with the same engine and gearbox combinations, so what matters is that the engine code and gearbox type on the donor car match yours, not what badge it wears. Bear in mind that Monte Carlo models may carry cosmetic or interior differences from other trims, but these are irrelevant to whether the mount itself is compatible.
Yes, the Kamiq does have a gearbox mount as a separate component from the engine mounts; on front-wheel-drive cars with transverse engines like the Kamiq, the gearbox sits beside the engine and has its own dedicated mount or bracket on the gearbox end of the drivetrain. It is common for breakers and listings to use the terms engine mount, gearbox mount, and transmission mount in slightly different ways, so it is worth describing to the breaker exactly where on the car the mount is located — nearside or offside, top or bottom — to make sure you both mean the same component. Supplying your engine code and gearbox type will also help the breaker pull the correct part from their stock.
The Škoda Kamiq shares the MQB A0 platform with the SEAT Arona and Volkswagen T-Cross, so there is a reasonable chance that mounts from these platform-mates could be compatible, particularly where the engine and gearbox codes match exactly. However, fitment across different models on a shared platform is not guaranteed, as mounting points and bracket designs can vary even between cars using the same engine, and this is exactly the kind of detail you should confirm with the breaker against your registration and engine code. A good breaker familiar with VAG Group parts will be able to cross-reference the part numbers and advise you definitively.