Findapart

Used Škoda Fabia Gearbox Mount

Get quotes for a used or replacement Škoda Fabia gearbox mount. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Fabia gearbox mount

No two gearbox mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Fabia parts

Used gearbox mount for other Škoda models

Fitment questions

Will a gearbox mount from an older Fabia fit my newer one?

The Škoda Fabia has run across three generations — Mk1 (1999–2007), Mk2 (2007–2014), and Mk3 (2014–2021) — and gearbox mounts are not interchangeable across those generation boundaries as a rule. Within a generation, fitment is largely driven by engine code and gearbox type rather than the year alone, so a mount from the same generation may well cross years if the engine code matches. Always confirm the exact engine code from your V5 or a VIN check and supply it to the breaker before buying.

Does the engine code really matter for a Fabia gearbox mount, or just the year?

Engine code matters above everything else for a gearbox mount — the mount is designed around the weight, orientation, and torque characteristics of the specific engine and gearbox combination, not just the model year. A 1.0 TSI petrol and a 1.4 TDI diesel sitting in the same year of Fabia will use completely different mounts. Pull the engine code from your V5 logbook or a VIN check and give it to the breaker as the first thing you tell them.

Does it matter whether my Fabia is a 5-door hatch or an estate when sourcing a gearbox mount?

Body style makes no difference to gearbox mount fitment — the mount is a mechanical component tied to the engine and gearbox combination, not the body. Whether you have a hatchback or an estate variant, what matters is the engine code, fuel type, and whether the car has a manual or automatic gearbox. Focus on those details when speaking to the breaker and ignore the body style entirely.

I have a Fabia Mk2 from around 2011 — will a mount from a 2007 early Mk2 fit?

Both fall within the Mk2 generation (2007–2014), so there is a reasonable chance of compatibility if the engine codes and gearbox types match, but there were running production changes during the Mk2's life that could affect mounting hardware. Confirm your engine code from the V5 and share it with the breaker, who can check the specific casting or part number against what they have. Never assume a match without that verification.

Does the trim level affect which gearbox mount I need — for example, Fabia Ambiente versus Elegance versus Monte Carlo?

Trim level has no bearing on gearbox mount fitment whatsoever — Ambiente, Elegance, Monte Carlo, and any other Fabia trim all use the same mount for a given engine and gearbox combination. Trim differences are cosmetic and interior-focused and do not change the drivetrain mounting setup. Just confirm your engine code and gearbox type and ignore the trim name entirely when speaking to the breaker.

Will a Fabia Mk2 gearbox mount cross over to a Mk3 Fabia?

The Mk2 ran from 2007 to 2014 and the Mk3 from 2014 to 2021, and these are distinct platforms with different engine bay layouts, so a straight swap across that boundary is very unlikely. Even where engine families carried over between generations, the mounting geometry and bracket design typically changed. Confirm this directly with the breaker by supplying both the registration and the engine code — do not assume compatibility across that generation boundary.