Findapart

Škoda Kodiaq Front Cross Member Replacement Parts

Get quotes for a used or replacement Škoda Kodiaq front cross member. Genuine second hand parts from UK vehicle dismantlers - free request, breakers with stock reply direct.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

Other used Škoda Kodiaq parts

Used front cross member for other Škoda models

Fitment questions

What years does the Škoda Kodiaq first generation cover, and does a cross member from an early car fit a later one?

The Škoda Kodiaq first generation ran from 2017 through to 2021, with a facelift arriving in 2021 that brought updated styling and some mechanical revisions. Cross members from within the pre-facelift 2017–2021 period are generally considered the same generation, but whether a part crosses the facelift boundary cleanly is something you should confirm with the breaker against your exact registration, as mounting points or subframe geometry can be revised at a facelift even when the shell looks similar. Never assume a pre-facelift part drops straight into a post-facelift car without that check.

Will a Škoda Kodiaq front cross member from a 2019 fit a 2017 car?

Both 2017 and 2019 Kodiaq models fall within the first-generation pre-facelift run, so they share the same basic platform and subframe architecture. In practice, cross members from within this window are widely treated as interchangeable by UK breakers, but you should still quote your registration to the breaker so they can verify the exact part numbers match before you buy. Fitment is never guaranteed from year alone.

Does engine size affect which front cross member I need on a Kodiaq?

Engine size can influence the surrounding running gear — larger or heavier engines sometimes require uprated mounts or slightly different subframe specifications to handle the additional load and braking demands. On the Kodiaq, the 2.0 TSI and 2.0 TDI engines are heavier units than the 1.5 TSI, so it is worth telling the breaker your exact engine code rather than just the displacement, to make sure the cross member they pull matches your setup. This is especially important if you are sourcing from a car with a different engine than your own.

Does trim level matter — will a cross member from a Kodiaq SE fit an SE L or a Sportline?

Trim level — whether SE, SE L, Sportline, or Edition — does not affect the front cross member itself, as this is a structural running-gear component determined by generation and drivetrain rather than specification level. You may find cosmetic differences around the front end between trims, such as different bumper covers or undertray panels, but the cross member underneath is the same. Confirm your registration and engine with the breaker as normal, and trim is not something you need to worry about for this part.

I have a four-wheel-drive Kodiaq — do I need a different front cross member than a two-wheel-drive model?

The Kodiaq's 4x4 drivetrain adds front driveshaft and differential components that mount in and around the front subframe area, so there is a real possibility the cross member or its mounting provisions differ from a front-wheel-drive car. You should always tell the breaker whether your car is 4x4 or FWD alongside your registration, as pulling a cross member from the wrong drivetrain layout could mean missing mounting points or incorrect geometry. Do not assume the part is identical across drivetrain variants.

Can I fit a front cross member from a Kodiaq vRS on a standard Kodiaq?

The Kodiaq vRS shares the same first-generation platform as the standard Kodiaq, so the generation boundary is the same: 2017 to the 2021 facelift. However, the vRS uses a more powerful 2.0 TSI or 2.0 TDI engine with performance-tuned running gear, and whether its cross member mounts or specifications differ from a standard car is something you should confirm with the breaker against both registrations rather than take on trust. Trim does not typically affect a cross member, but performance-variant subframe specifications are worth verifying directly.