Findapart

Škoda Scala Gearbox Mount Replacement Parts

Compare prices on a used Škoda Scala gearbox mount from UK breakers. Free part request, no obligation.

Enter your registration or select your vehicle

Find the right part faster and get quotes direct from UK breakers - free, and no obligation.

GB

A buyer's guide to used Škoda Scala gearbox mount

No two gearbox mounts are quite the same across different vehicles, so getting the specifics right matters when you buy used, second hand or a replacement. Answer a few quick questions below and breakers will only quote if they have the exact matching part in stock:

Other used Škoda Scala parts

Used gearbox mount for other Škoda models

Fitment questions

Does a Škoda Scala actually have a gearbox mount?

Yes, the Škoda Scala does have a gearbox mount — it is a front-wheel-drive car with a transversely mounted engine, and a gearbox mount (also called a transmission mount) is a standard part of the drivetrain mounting arrangement on all variants. The mount cushions the gearbox against vibration and holds it in position within the engine bay, and it will be present whether the car is fitted with a manual or automatic gearbox. If you are unsure which specific mount you need (some cars have more than one mounting point), confirm the exact location with the breaker before ordering.

Will a gearbox mount from an earlier Škoda Scala fit my newer one — does the Scala have different generations?

The Škoda Scala was launched in 2019 and has remained within a single generation throughout its production run to date, with a facelift introduced in 2024. A mount from a pre-facelift car (2019–2023) and a post-facelift car (2024 onwards) may or may not be the same part, as mounting arrangements can change at a facelift even when the basic platform does not — confirm with the breaker against your exact registration and engine code before purchasing. The engine code is the most reliable detail you can supply, as the mount design follows the drivetrain rather than the model year badge.

Does it matter which engine my Scala has when buying a used gearbox mount?

Yes, engine code is the most important detail when sourcing a used gearbox mount for the Škoda Scala, because different engines and gearbox combinations can use different mount specifications, positions, or fixing arrangements. The Scala has been offered with a range of petrol engines (including 1.0 TSI and 1.5 TSI units) and a diesel (1.6 TDI in some markets, though UK availability should be confirmed), and each combination may have its own mount design. Find your engine code on your V5 logbook or via a VIN check, and give it to the breaker — this single detail will do more to confirm compatibility than year or trim level alone.

Does the trim level affect which gearbox mount I need — will a mount from a SE fit an SE L or Sportline?

No, the trim level does not affect the gearbox mount — SE, SE L, and Sportline are equipment and cosmetic distinctions and do not alter the drivetrain mounting arrangement. What matters is whether the engine code and gearbox type match between the donor car and yours, regardless of what trim either car was. You may find cosmetic differences between cars of different trims when collecting the part from a breaker, but the mount itself is a mechanical component and trim has no bearing on fitment.

Can I use a gearbox mount from a Škoda Scala with a manual gearbox on my automatic Scala?

This is worth treating with caution — manual and automatic (DSG) gearboxes are physically different units and can require different mounts to suit their differing size, weight, and position in the engine bay. Always tell the breaker whether your car has a manual or automatic gearbox, as well as your engine code, so they can match the correct mount. Never assume a mount from a manual car will suit an automatic, or vice versa.

I've found a cheap Škoda Scala gearbox mount — what details should I give the breaker to make sure it fits?

Give the breaker your engine code (found on your V5 or via a VIN check), your gearbox type (manual or DSG automatic), and your car's registration or model year — these three details together give the breaker the best chance of matching the correct mount to your car. If the mount is coming from a car of a different year, ask the breaker to confirm the part number against your registration, particularly if there is any chance the donor car is a 2024 facelift model and yours is pre-facelift, or vice versa. No supplier can guarantee fitment on a used part, so confirming these details directly with the breaker before you buy is essential.