Need a used Škoda Kodiaq wishbone? Request a free quote from UK vehicle dismantlers and compare offers direct.
Find the right part faster and get quotes direct from UK breakers - free, and no obligation.
Used wishbones vary between vehicles - and whether you call it used, second hand or a replacement, matching the right one matters. These are the details breakers need to match the right part to your car - our request form asks them so you only hear from suppliers with the correct part:
The Kodiaq first generation runs from 2016 to 2024, with a facelift introduced in 2021 that brought styling and equipment updates. For wishbones, the key question is whether the suspension geometry changed at that 2021 facelift point, and you should confirm with the breaker whether a pre-facelift or post-facelift part matches your registration. Always quote your reg to the breaker so they can check against their stock directly.
The 2019 car is pre-facelift first generation and the 2022 is the facelifted first generation, so they share the same overall platform, but suspension components can change across a facelift update even without a full generation change. We'd strongly recommend you confirm with the breaker whether the wishbone from a pre-2021 car crosses over to a post-2021 car against your specific registration. Don't assume fitment just because both are first-generation Kodiaqs.
Yes, engine size can matter for running gear because heavier or more powerful variants sometimes use uprated suspension components to cope with the extra weight and torque. When contacting a breaker, give them your engine size alongside your reg so they can match the correct wishbone from a like-for-like donor car. This is especially worth checking if you're comparing a 1.5 TSI car with a 2.0 TDI 4x4 variant.
Trim level does not affect wishbone fitment on the Kodiaq — the suspension geometry is the same across SE, SE L, Scout and Sportline grades. What can differ is that Scout models are set up for mild off-road use and Sportline may have lowered or firmer suspension, so if you want to confirm whether any suspension geometry differences exist on your specific variant, check with the breaker against your reg. You may simply end up with a part from a different trim with no cosmetic difference visible at all once fitted.
Side absolutely matters — nearside (NS, left) and offside (OS, right) wishbones are handed and not interchangeable. Always specify to the breaker whether you need the NS or OS part, and double-check this against the side of the car that needs the repair before ordering. Fitting the wrong side is a common and easily avoided mistake.
The Kodiaq vRS shares the same first-generation platform and the wishbone geometry is the same as standard Kodiaq models, so a like-for-like wishbone can in principle be sourced from a standard donor car. However, the vRS has a more powerful engine and may have specific suspension tuning, so confirm with the breaker that the donor car's spec aligns with yours, quoting your registration. Never assume fitment without that check.